7063246YP PTO clutch replacement for Snapper ZTR Scrambler and Yard Cruiser mowers, replacing 63246, 7063246, John Deere AM138730, Warner 5219-15, and more related cross-reference numbers.

7063246YP PTO Clutch Replacement for Snapper ZTR, Murray & More | Replaces 63246, AM138730

$159.95
Skip to product information
7063246YP PTO clutch replacement for Snapper ZTR Scrambler and Yard Cruiser mowers, replacing 63246, 7063246, John Deere AM138730, Warner 5219-15, and more related cross-reference numbers.
  • 7063246YP PTO clutch replacement for Snapper ZTR Scrambler and Yard Cruiser mowers, replacing 63246, 7063246, John Deere AM138730, Warner 5219-15, and more related cross-reference numbers.
  • Black t-plug design common on PTO clutches against white background.
  • PTO clutch replacement for Snapper ZTR Scrambler and Yard Cruiser mowers under side showing bearing, clamshell, and wire connector.
7063246YP PTO Clutch Replacement for Snapper ZTR, Murray & More | Replaces 63246, AM138730

7063246YP PTO Clutch Replacement for Snapper ZTR, Murray & More | Replaces 63246, AM138730

$159.95

The 7063246YP PTO clutch replacement is an aftermarket electric PTO clutch for select Snapper ZTR, Murray, Dixon, Husqvarna, AYP, Craftsman, Country Clipper, John Deere, Case, Bush Hog, Jacobsen, and related applications using the 7063246YP / 63246 clutch path.

This clutch is commonly searched as a replacement for Snapper 7063246YP, Murray 63246, Husqvarna 539120786, Dixon 120786, John Deere AM138730, Country Clipper E-6317, and several Warner, Xtreme, and Prime Line cross-reference numbers. Use your mower model, deck size, original clutch number, crankshaft bore, pulley diameter, rotation, connector style, and anti-rotation setup to confirm fitment before ordering.

Key Features

  • Aftermarket replacement PTO clutch for select Snapper, Murray, Husqvarna, Dixon, AYP, Craftsman, Country Clipper, John Deere, Case, Bush Hog, Jacobsen, and related mower applications
  • Replacement for OEM part numbers: 7063246YP, 7063246, 63246, 120786, 539120786, 114595, 539114595, AM138730, C48625, E-6317, 50055658, and more
  • Warner cross-references: 5219-15, 5219-22, 5219-102, 5219-28, 5219-80, 5219-48
  • Xtreme cross-references: X0122, X0343, X0347, X0533, X0395, X0350, X0363
  • Common Snapper routing: select ZTR Scrambler, Yard Cruiser, and Twin Stick 42 inch and 48 inch applications
  • Crankshaft bore: 1 inch
  • Pulley diameter: 5.3 inches
  • Rotation: Counter-clockwise from pulley side
  • Fitment-first replacement: compare your original clutch before installation

Compatible Brands & Models

This clutch fits select applications from the following brand families when the original clutch path and product specs match:

  • Snapper
  • Murray
  • Dixon
  • Husqvarna
  • AYP
  • Roper
  • Poulan
  • Sears Craftsman
  • Yazoo Kees
  • Country Clipper
  • Bush Hog
  • Case
  • Ingersoll Rand
  • Jacobsen
  • John Deere
  • Electrolux
  • Massey Ferguson
  • McCulloch

Snapper ZTR Model References

  • ZTR Yard Cruiser 42 inch Series 3
  • ZTR Yard Cruiser 42 inch Series 4
  • ZTR Yard Cruiser 48 inch Series 3
  • ZTR Yard Cruiser 48 inch Series 4
  • ZTR Twin Stick 42 inch Series 6
  • ZTR Twin Stick 48 inch Series 6
  • ZTR Scrambler 42 inch Series 5
  • ZTR Scrambler 42 inch Series 6
  • ZTR Scrambler 48 inch Series 5
  • ZTR Scrambler 48 inch Series 6

For a model-focused Snapper and Murray breakdown, see the Snapper 7063246YP / 63246 PTO Clutch Guide.

Country Clipper Model References

  • Jazze / Jazzee 2004, 2005, II 2004, II 2005
  • Jazze SR100, SR105, ST110
  • Jazze SR200, SR205, SR210, SR215, SR220
  • Jazze SR300, SR350, SR360, SR365, SR370
  • Trek all models
  • Wrangler 2011
  • Zeton Brat

For Country Clipper Jazee, SR Series, Trek, Wrangler, Zeton Brat, E-6317, Warner 5219-22, and Xtreme X0347 routing, see the Country Clipper E-6317 PTO Clutch Guide.

Dixon, Husqvarna, AYP, Craftsman and Related Model References

  • EZF3417
  • EZ4624, EZ5226, EZ5426, EZ17, EZ21
  • ZMMKW 34170 ZTR
  • Home Series HS1736B, HS1742B, HS1836B, HS1842B, HS2036K, HS2042K

For Husqvarna 120786, 539120786, Dixon 16026, AYP, Craftsman, Poulan, Roper, and Yazoo Kees routing, see the Husqvarna 120786 / Dixon 16026 PTO Clutch Guide.

Additional Model References

Additional model references associated with this clutch path may include select Black Bear Series, Ram, Ram Mag, Grizzly, Kodiak, Home Series, and related applications when the original clutch number and specs match.

  • Black Bear Series
  • Ram 44, Ram 50, Ram Mag, Ram Mag 50
  • Ram 50 2004-2006
  • Grizzly 50, Grizzly 52, Grizzly 60
  • Kodiak 50
  • 2300-60
  • 1950-50

Fitment caution: The model lists above are routing references. Do not order by model name alone. Confirm the original clutch number, 1 inch bore, 5.3 inch pulley diameter, counter-clockwise rotation, connector style, and anti-rotation setup before ordering.

Replaces OEM Part Numbers

  • Snapper: 63246, 7063246, 7063246YP
  • Murray: 63246, 7063246, 7063246YP
  • Husqvarna: 120786, 539120786, 114595, 539114595
  • AYP / Roper: 120786, 539120786, 114595, 539114595
  • Dixon: 120786, 539120786, 16026, 114595, 539114595, 16138
  • Electrolux: 120786, 539120786, 114595, 539114595
  • Massey Ferguson: 120786, 539120786, 114595, 539114595
  • McCulloch: 120786, 539120786, 114595, 539114595
  • Poulan: 120786, 539120786, 114595, 539114595
  • Sears Craftsman: 120786, 539120786, 114595, 539114595
  • Yazoo Kees: 120786, 539120786, 114595, 539114595
  • Country Clipper: E-6317
  • Bush Hog: 50055658
  • Case: C48625
  • Ingersoll Rand: C48625
  • Jacobsen: C48625
  • John Deere: AM138730

Cross-Reference Aftermarket Numbers

  • Warner: 5219-15, 5219-22, 5219-102, 5219-28, 5219-80, 5219-48
  • Xtreme: X0122, X0122-K, X0343, X0343-K, X0347, X0347-K, X0533, X0395, X0395-K, X0350, X0350-K, X0363, X0363-K
  • Prime Line: 7-06211, 7-06212

If your original clutch is marked with one of the Warner, Xtreme, or Prime Line numbers above, use that number as a strong confirmation point, then compare the clutch specs and fitment details before ordering.

If your old clutch label shows a Warner 5219-series number, use the Warner 5219 PTO Clutch Cross Reference to compare 5219-15, 5219-22, 5219-28, 5219-80, 5219-102, 5219-48, and related paths.

Before Installing

Before installing the replacement PTO clutch, inspect the mower for conditions that could damage a new clutch or make a good clutch look bad.

  • Confirm the crankshaft bore is 1 inch
  • Compare pulley diameter, pulley alignment, rotation, and anti-rotation setup
  • Check deck belt condition and routing
  • Inspect idler pulleys and spindle bearings for drag or noise
  • Inspect the PTO wiring connector for corrosion, loose terminals, melting, or damage
  • Check the crankshaft, key, bolt threads, and keyway for rust, burrs, or wear

Review the PTO clutch installation guide before mounting the replacement. If the old clutch is rusted, seized, binding on the keyway, or will not slide off the crankshaft by hand, use the PTO clutch stuck on crankshaft guide before forcing removal.

Common PTO Clutch Symptoms

A failing PTO clutch can look like a belt problem, wiring problem, or deck-drive problem. Check the full blade engagement system before replacing parts.

  • Blades will not engage when the PTO switch is activated
  • PTO clutch clicks but the deck belt does not move
  • Blades engage, then slow down under load
  • PTO works cold but quits after 10 to 30 minutes
  • Burning smell or excessive heat near the clutch
  • Blown fuse, melted connector, poor ground, or intermittent engagement

If the blades will not engage, start with the PTO clutch won’t engage troubleshooting guide. If the clutch clicks but the blades do not spin, use the PTO clutch clicks but blades won’t spin guide.

Why Buy From PTO Direct USA?

  • Fitment-focused PTO clutch listings built around part-number and model routing
  • Clear OEM and aftermarket cross-reference information
  • Support available before ordering if you are not sure which clutch path fits your mower
  • Aftermarket replacement PTO clutches for residential and commercial mower applications

Need Help Confirming Fitment?

If you are not sure whether this clutch fits your mower, email support@ptodirectusa.com with your mower model number, serial number, deck size, engine package, and clear photos of your old clutch. For best fitment help, include photos of the clutch label or stamped number, wiring connector, pulley, anti-rotation setup, crankshaft area, and mower identification tag.

You can also browse the electric PTO clutch catalog or use the PTO clutch fitment guide before ordering.

Related Fitment & Cross-Reference Guides

FAQ

Does this PTO clutch replace Snapper 7063246YP?

Yes. This aftermarket PTO clutch is listed as a replacement for Snapper 7063246YP on select applications. Confirm the mower model, deck size, original clutch number, bore size, pulley diameter, rotation, connector, and anti-rotation setup before ordering.

Does this replace Snapper or Murray 63246?

Yes. This clutch replaces Snapper 63246 and Murray 63246 on supported applications using the same 7063246YP / 63246 clutch path.

Does this fit Snapper ZTR Scrambler and Yard Cruiser models?

This clutch fits select Snapper ZTR Scrambler, Yard Cruiser, and Twin Stick 42 inch and 48 inch applications when the original clutch number and physical specs match. Use the model list above as a routing guide, then confirm fitment before ordering.

Does this replace Husqvarna 539120786?

Yes. Husqvarna 539120786 is listed in this replacement path on supported applications. Related numbers include 120786, 114595, and 539114595.

Does this replace John Deere AM138730?

AM138730 is listed as a John Deere cross-reference path for this clutch family. Confirm the mower model, serial range, deck setup, original clutch details, bore size, pulley diameter, rotation, and connector style before ordering.

Does this replace Country Clipper E-6317?

Yes. Country Clipper E-6317 is listed as an OEM replacement path for this clutch family on supported applications, including select Jazze / Jazzee, Trek, Wrangler, and Zeton Brat references.

What is the bore size?

The crankshaft bore is 1 inch.

What is the pulley diameter?

The pulley diameter is 5.3 inches.

What rotation is this PTO clutch?

This clutch is listed as counter-clockwise rotation from the pulley side.

Does this replace Warner 5219-15?

Yes. Warner 5219-15 is one of the listed cross-reference numbers for this replacement path. Other Warner references include 5219-22, 5219-102, 5219-28, 5219-80, and 5219-48.

Does this replace Xtreme X0122?

Yes. Xtreme X0122 and X0122-K are listed aftermarket cross-references for this clutch path. Other Xtreme references include X0343, X0347, X0533, X0395, X0350, and X0363 on supported applications.

Can this clutch fit brands besides Snapper?

Yes. This clutch path also appears across select Murray, Dixon, Husqvarna, AYP, Craftsman, Yazoo Kees, Country Clipper, Case, Jacobsen, John Deere, Bush Hog, and related applications. Confirm the original clutch number and specs before ordering.

Can PTO Direct USA help confirm fitment?

Yes. Email support@ptodirectusa.com with your mower model number, serial number, deck size, engine package, and photos of the old clutch, connector, pulley, anti-rotation setup, crankshaft area, and mower ID tag.

You may also like