PTO clutch cross-reference data can get messy fast. The same aftermarket listing may mention Snapper, Murray, Husqvarna, Dixon, John Deere, Country Clipper, Bush Hog, Case, Warner, Xtreme, and Prime Line numbers in one long compatibility dump. Some of those numbers are direct replacement paths, while others are search-routing clues that need extra fitment confirmation.
This guide is built to help you route common numbers around the 7063246YP / 63246 PTO clutch replacement path. Use the tables below to compare OEM numbers, Warner numbers, Xtreme numbers, aftermarket references, mower brands, and known fitment traps before ordering an aftermarket replacement PTO clutch.
Find Your 7063246YP / 63246 PTO Clutch Path
Table tip: On mobile, swipe sideways to view the full cross-reference table.
| Search Path | Common Numbers | Brand / Application Clue | Fitment Note | Replacement Path |
|---|---|---|---|---|
| Snapper / Murray | 7063246YP, 7063246, 63246 | Snapper ZTR Scrambler, Yard Cruiser, Twin Stick, select Murray applications | Strong direct routing path for this replacement family | 7063246YP PTO Clutch Replacement |
| Husqvarna / AYP / Dixon | 120786, 539120786, 16026 | Select Husqvarna, AYP, Dixon, Poulan, Roper, Craftsman, Yazoo Kees and related applications | Commonly routed with the 7063246YP / 63246 replacement path | 7063246YP PTO Clutch Replacement |
| Warner 5219 Path | 5219-15, 5219-22, 5219-28, 5219-48, 5219-80, 5219-102 | Warner manufacturer numbers found on PTO clutch labels and cross-reference lists | Confirm carefully because 5219-series numbers are often lumped together in aftermarket catalogs | 7063246YP PTO Clutch Replacement |
| John Deere | AM138730 | Select John Deere applications searched by AM138730 | Check pulley alignment and offset-style geometry before installation | 7063246YP PTO Clutch Replacement |
| Country Clipper | E-6317 | Jazee / Jazzee, SR Series, Trek, Wrangler, Zeton Brat references | Confirm wiring, pulley position, and anti-rotation setup before ordering | 7063246YP PTO Clutch Replacement |
| Bush Hog | 50055658 | Home Series and related Bush Hog mower references | Check torque load, belt alignment, and deck-drive setup carefully | 7063246YP PTO Clutch Replacement |
| Case / Ingersoll Rand / Jacobsen | C48625 | Select Case, Ingersoll Rand, and Jacobsen applications | Confirm anti-rotation bracket, wiring, and pulley alignment before installation | 7063246YP PTO Clutch Replacement |
| Xtreme | X0122, X0122-K, X0395, X0395-K, X0343, X0347, X0533, X0350, X0363 | Aftermarket cross-reference numbers used in replacement catalogs | Use as routing clues; confirm specs and original clutch layout before ordering | 7063246YP PTO Clutch Replacement |
| Prime Line | 7-06211, 7-06212 | Aftermarket cross-reference numbers | Prime Line data can be inconsistent across catalogs; verify physical specs | 7063246YP PTO Clutch Replacement |
Important fitment note: This page is a cross-reference routing guide, not a universal interchange guarantee. PTO clutch fitment can change by model year, serial number, engine package, deck size, crankshaft bore, pulley alignment, wiring connector, and anti-rotation setup. Confirm fitment before ordering.
Need a narrower guide? Use the path-specific guides below if you already know your mower brand or number family:
- Snapper 7063246YP / 63246 PTO Clutch Guide for Yard Cruiser, Scrambler, Twin Stick, and Murray 63246 searches.
- Husqvarna 120786 / Dixon 16026 PTO Clutch Guide for Husqvarna, AYP, Dixon, Craftsman, Poulan, Roper, and Yazoo Kees paths.
- John Deere AM138730 PTO Clutch Guide for Z225, Z425, Z445, Z465, and pulley-alignment checks.
- Warner 5219 PTO Clutch Cross Reference for 5219-15, 5219-22, 5219-28, 5219-80, 5219-102, and related Warner label searches.
Aftermarket Consolidation Note
Some OEM and aftermarket catalogs list slightly different pulley diameters, pulley offsets, wiring details, or torque ratings across related PTO clutch numbers. In the aftermarket replacement world, suppliers may consolidate related OEM paths into one replacement clutch when the bore size, rotation, mounting clearance, belt alignment, and deck-drive geometry are compatible within acceptable service tolerance.
That does not mean every number is automatically interchangeable on every mower. It means the replacement path should be checked against the original clutch and mower setup before installation. If your original clutch uses an offset-style pulley, unusual wiring lead, special anti-rotation bracket, or previous aftermarket substitution, compare the physical layout before ordering.
Main Replacement Path: 7063246YP / 63246 PTO Clutch
The 7063246YP PTO Clutch Replacement is the lead replacement path for this cross-reference family. It is commonly searched by Snapper, Murray, Husqvarna, Dixon, John Deere, Country Clipper, Warner, Xtreme, Prime Line, Bush Hog, Case, and related part numbers.
- Primary Snapper / Murray numbers: 7063246YP, 7063246, 63246
- Husqvarna / AYP / Dixon path: 120786, 539120786, 16026
- Additional OEM search paths: 114595, 539114595, 16138, AM138730, C48625, E-6317, 50055658
- Warner search paths: 5219-15, 5219-22, 5219-102, 5219-28, 5219-80, 5219-48
- Xtreme search paths: X0122, X0122-K, X0343, X0343-K, X0347, X0347-K, X0533, X0395, X0395-K, X0350, X0350-K, X0363, X0363-K
- Prime Line search paths: 7-06211, 7-06212
Core Specs to Confirm
| Product Type | Electric PTO clutch |
| Crankshaft Bore / ID | 1 inch |
| Pulley Diameter | 5.3 inch / 5.35 inch class |
| Rotation | Counter-clockwise from pulley side |
| Common Deck References | Select 42 inch and 48 inch mower applications |
Pulley diameter note: aftermarket catalogs may round pulley diameter differently, including 5.3 inch, 5.35 inch, 5-3/8 inch, or nearby measurements. The critical installation checks are bore size, pulley alignment, belt tracking, rotation, clearance, connector style, and anti-rotation setup.
Snapper and Murray 7063246YP / 63246 Applications
The strongest direct path for this clutch is the Snapper / Murray number family: 7063246YP, 7063246, and 63246. This path is commonly associated with select Snapper ZTR Scrambler, Yard Cruiser, and Twin Stick 42 inch and 48 inch applications.
- ZTR Yard Cruiser 42 inch Series 3
- ZTR Yard Cruiser 42 inch Series 4
- ZTR Yard Cruiser 48 inch Series 3
- ZTR Yard Cruiser 48 inch Series 4
- ZTR Twin Stick 42 inch Series 6
- ZTR Twin Stick 48 inch Series 6
- ZTR Scrambler 42 inch Series 5
- ZTR Scrambler 42 inch Series 6
- ZTR Scrambler 48 inch Series 5
- ZTR Scrambler 48 inch Series 6
For a narrower model-focused breakdown, use the Snapper 7063246YP PTO Clutch Guide. It covers the Yard Cruiser, Scrambler, Twin Stick, Murray 63246 path, and the key 1 inch bore / 5.3 inch pulley class checks.
If your Snapper or Murray clutch number matches 7063246YP, 7063246, or 63246, compare the 7063246YP PTO Clutch Replacement product details before ordering.
Husqvarna, AYP, Dixon, Poulan, Craftsman and Yazoo Kees Path
This clutch path also appears under shared number families used across select Husqvarna, AYP, Dixon, Poulan, Roper, Craftsman, Yazoo Kees, Electrolux, Massey Ferguson, and McCulloch applications.
- Common numbers: 120786, 539120786, 114595, 539114595
- Dixon numbers: 16026, 16138
- Common model clues: select EZ, Ram, Ram Mag, Grizzly, Kodiak, Home Series, Jazze / Jazzee, Trek, Wrangler, and Zeton Brat applications
Because this path crosses several mower brands and model families, use the part number as a routing clue first. Then confirm bore size, pulley alignment, rotation, connector style, and anti-rotation setup before ordering.
For the focused Husqvarna, AYP, Dixon, Craftsman, Poulan, Roper, and Yazoo Kees path, use the Husqvarna 120786 / Dixon 16026 PTO Clutch Guide.
John Deere AM138730 Cross-Reference Path
AM138730 is the John Deere number commonly connected to this aftermarket search path. It is a valuable part-number clue, but it needs extra attention because some AM138730 references show offset-style pulley geometry.
- John Deere number: AM138730
- Lead replacement path: 7063246YP PTO Clutch Replacement
- Key checks: 1 inch bore, pulley position, belt alignment, rotation, wiring, and anti-rotation setup
John Deere AM138730 fitment note: if your original clutch uses an offset pulley, compare pulley position, belt alignment, crankshaft bore, wiring connector, and anti-rotation setup before installing this aftermarket replacement. Do not order by part number alone if the original clutch has been modified, replaced before, or has unclear markings.
For model and serial-range routing, use the John Deere AM138730 PTO Clutch Guide before ordering.
Warner 5219 Cross-Reference Numbers
Warner numbers are often found on the clutch label or used in aftermarket catalogs. They are useful for routing, but the Warner 5219 family is one of the places where marketplace listings can get sloppy.
- Warner 5219-15
- Warner 5219-22
- Warner 5219-102
- Warner 5219-28
- Warner 5219-80
- Warner 5219-48
Warner fitment note: do not assume every Warner 5219-series clutch is automatically interchangeable on every mower. Use the Warner number as a starting point, then compare the mower brand path, bore size, pulley class, pulley alignment, torque demand, connector, and anti-rotation setup before ordering.
For a deeper breakdown of Warner 5219-15, 5219-22, 5219-28, 5219-80, 5219-102, 5219-48, and John Deere-related Warner paths, use the Warner 5219 PTO Clutch Cross Reference.
Xtreme and Prime Line Cross-Reference Numbers
Xtreme and Prime Line numbers are aftermarket cross-references, not mower model numbers. They can help identify the correct replacement direction when the mower-brand number is missing or unreadable.
Xtreme Search Paths
- X0122, X0122-K
- X0343, X0343-K
- X0347, X0347-K
- X0533
- X0395, X0395-K
- X0350, X0350-K
- X0363, X0363-K
Prime Line Search Paths
- 7-06211
- 7-06212
Aftermarket cross-reference note: aftermarket cross-reference numbers can be helpful, but they should not override the physical clutch checks. Confirm bore size, pulley alignment, rotation, wiring, anti-rotation setup, and deck-drive clearance before ordering.
Country Clipper, Bush Hog, Case, Ingersoll Rand and Jacobsen Paths
This clutch family is also commonly searched alongside lower-volume but important OEM paths.
- Country Clipper: E-6317
- Bush Hog: 50055658
- Case: C48625
- Ingersoll Rand: C48625
- Jacobsen: C48625
These paths can be useful for part-number searches, but they should be treated as fitment routes rather than broad brand-wide claims. Confirm the original clutch number and physical specs before ordering.
Common Ordering Mistakes
- Ordering by brand alone: Snapper, Murray, Husqvarna, Dixon, John Deere, Country Clipper, Bush Hog, Case, and Craftsman applications do not all use one universal PTO clutch.
- Trusting marketplace dumps without checking specs: long compatibility lists can lump related but different clutch paths together.
- Ignoring pulley alignment: pulley diameter is important, but pulley position and belt tracking matter just as much.
- Ignoring offset-style pulleys: if your original clutch has an offset pulley, compare the new clutch carefully before installation.
- Skipping wiring and anti-rotation checks: connector style, wire routing, and anti-rotation bracket position can make or break fitment.
- Replacing the clutch before checking the deck drive: a bad belt, seized idler, dragging spindle, poor ground, or melted connector can mimic PTO clutch failure.
Before Installing the Replacement
Before installing a replacement PTO clutch, compare the new clutch to the old clutch and inspect the mower for issues that could damage the replacement.
- Confirm the original clutch number or cross-reference number when available
- Confirm 1 inch crankshaft bore
- Compare pulley diameter and pulley alignment
- Confirm counter-clockwise rotation from pulley side
- Compare wiring connector, wire lead, and anti-rotation setup
- Check the deck belt for glazing, cracking, stretching, oil contamination, or incorrect routing
- Spin idlers and spindle pulleys by hand to check for drag or bearing noise
- Inspect the crankshaft, key, bolt threads, and keyway for rust, burrs, or damage
Review the PTO clutch installation guide before mounting the replacement. If the old clutch is rusted, seized, binding on the keyway, or will not slide off the crankshaft by hand, use the PTO clutch stuck on crankshaft guide before forcing removal.
Need Help Confirming Fitment?
If you are not sure whether this clutch path fits your mower, email support@ptodirectusa.com with your mower model number, serial number, deck size, engine package, and clear photos of the old clutch. For best fitment help, include photos of the clutch label or stamped number, wiring connector, pulley, anti-rotation setup, crankshaft area, and mower identification tag.
PTO Direct USA supplies aftermarket replacement PTO clutches for select Snapper, Murray, Husqvarna, Dixon, AYP, Craftsman, John Deere, Country Clipper, Bush Hog, Case, Jacobsen, and related mower applications. These products are replacement parts for matching OEM and aftermarket cross-reference numbers. Confirm fitment before ordering.
Related Warner 5219 PTO Clutch Guides
- 7063246YP / 63246 PTO Clutch Cross Reference Guide
- Snapper 7063246YP / 63246 PTO Clutch Guide
- Husqvarna 120786 / Dixon 16026 PTO Clutch Guide
- Country Clipper E-6317 PTO Clutch Guide
- John Deere AM138730 PTO Clutch Guide
FAQ
What does Snapper 7063246YP replace?
Snapper 7063246YP routes with Snapper 7063246 and 63246 on supported applications. It also appears in related OEM, Warner, Xtreme, and aftermarket cross-reference paths.
Does this clutch replace Murray 63246?
Yes. Murray 63246 is part of the 7063246YP / 7063246 / 63246 clutch path on supported applications. Confirm the mower model and physical clutch specs before ordering.
Does this replace Husqvarna 120786 or 539120786?
120786 and 539120786 are commonly routed through this aftermarket replacement path on supported Husqvarna, AYP, Dixon, Poulan, Roper, Craftsman, Yazoo Kees, and related applications. Confirm physical fitment before ordering.
Does this replace John Deere AM138730?
AM138730 is a common John Deere search path connected to this aftermarket replacement route. Because some AM138730 references involve offset-style pulley geometry, compare pulley position, belt alignment, wiring, and anti-rotation setup before ordering.
What Warner numbers cross to this path?
Common Warner search paths include 5219-15, 5219-22, 5219-102, 5219-28, 5219-80, and 5219-48. Warner 5219-series numbers should be checked carefully because aftermarket catalogs may group related clutch paths together.
What Xtreme numbers cross to this path?
Common Xtreme search paths include X0122, X0122-K, X0343, X0343-K, X0347, X0347-K, X0533, X0395, X0395-K, X0350, X0350-K, X0363, and X0363-K. Use these as cross-reference clues and confirm physical fitment before ordering.
What is the bore size?
This replacement path is built around a 1 inch crankshaft bore.
What pulley diameter should I compare?
This replacement path is commonly listed in the 5.3 inch / 5.35 inch pulley class. Some catalogs round the pulley size differently. Compare pulley alignment, belt tracking, and clearance before installation.
What rotation is this clutch?
This clutch path is listed as counter-clockwise rotation from the pulley side.
Can I order by cross-reference number only?
A clear cross-reference number is a strong starting point, but final fitment should still be confirmed by mower model, serial number, deck size, engine package, bore size, pulley alignment, connector, and anti-rotation setup.
Can PTO Direct USA help identify my clutch?
Yes. Email support@ptodirectusa.com with your mower model number, serial number, deck size, engine package, and photos of the old clutch, connector, pulley, anti-rotation setup, crankshaft area, and mower ID tag.