500144 PTO Clutch Replacement for Dixie Chopper Zee 2 | Replaces Ogura GT1A-EH01, 53462700

Overview

This Dixie Chopper 500144 PTO clutch replacement is an aftermarket electric PTO clutch for select Dixie Chopper Zee 2 mower applications using the 500144 / Ogura GT1A-EH01 clutch path.

This clutch replaces Dixie Chopper 500144, Ogura GT1A-EH01, and Ogura 53462700. It also cross-references Ferris 5100417, Rotary 15771, and the Xtreme X0596A 1-1/8 inch bore replacement path.

Built with a 1-1/8 inch crankshaft bore, 6 inch to 6-1/8 inch pulley diameter, CCW rotation, and compatibility with 1/2 inch or 5/8 inch belts on supported applications, this clutch is designed to restore reliable blade engagement when matched to the correct original clutch number and physical specs.

Important fitment warning: Do not merge this clutch with Dixie Chopper 500012 or Dixie Chopper 500056. The 500012 path uses a larger 7-inch class pulley, while the 500056 path is a separate Warner-style clutch path with different rotation requirements. Always match your original clutch number, bore size, pulley diameter, rotation, connector style, and product photos before ordering.

Key Features

• Aftermarket electric PTO clutch replacement for select Dixie Chopper Zee 2 applications
• Crankshaft Bore: 1.125" / 1-1/8"
• Pulley Diameter: 6" to 6-1/8" nominal
• Rotation: CCW from pulley side
• Belt Width: 1/2" or 5/8" belt compatibility on supported applications
• Voltage: 12V DC
• Connector Style: integrated pigtail / connector style as shown in product photos
• Operating Speed: up to 3600 RPM on supported applications
• Encapsulated electromagnetic coil for reliable deck engagement
• Heavy-duty bearing design for mower deck operating conditions
• Fully assembled and ready to install after fitment verification

Compatible Brands & Models

This product page is focused on the Dixie Chopper 500144 fitment path. The same Ogura-based clutch architecture may also appear under other brand numbers, but Dixie Chopper buyers should confirm fitment by original clutch number first.

Dixie Chopper Applications

• Dixie Chopper Zee 2: select 42", 48", and 54" applications
• Dixie Chopper Zee 2 HP: select high-performance applications

Fitment note: Dixie Chopper model names alone are not enough to confirm compatibility. Always verify the original clutch number when possible or contact support to verify before ordering.

Additional Cross-Brand Paths

This clutch path is also commonly associated with select applications using Ferris 5100417, Husqvarna / AYP 532179335, 532414737, Gravely 04553800, and related Ogura GT1A-EH01 replacements. Those applications should be verified by OEM number and physical specs before ordering.

Shopping by Husqvarna, AYP, Jonsered, or Poulan Pro number? See the 532179335 PTO clutch replacement. This page is organized around Dixie Chopper 500144 fitment, but both paths may reference the same Ogura GT1A-EH01 clutch architecture.

Replaces OEM Part Numbers

• Dixie Chopper: 500144
• Ogura: GT1A-EH01, 53462700
• Ferris: 5100417
• Gravely: 04553800
• Husqvarna / AYP: 532179335, 532414737, 532179355
• Craftsman / AYP: 179335, 174605, 414737, 532174605

Cross-Reference Aftermarket Numbers

• Rotary: 15771
• Xtreme: X0596A, X0169
• Warner: 5215-140
• 8TEN: 810-CPT2398O

Cross-reference caution: Some aftermarket catalogs list Xtreme X0596 or Stens 255-119 with conflicting 1-inch bore data. This Dixie Chopper 500144 path requires a 1-1/8 inch bore. Do not order by cross-reference alone if the bore size is not confirmed.

What’s Included

• Complete electric PTO clutch assembly
• Factory-balanced 6" to 6-1/8" pulley
• Pre-installed bearing assembly
• Encapsulated electromagnetic coil
• Integrated connector / pigtail style as shown in product photos

Why Buy From PTO Direct USA?

• Fast USA shipping
• fitment guarantee
• 1-year warranty
• Fitment-first product support
• Clear product images for easier clutch identification
• Trusted replacement supplier for homeowners, repair shops, and mower service professionals

FAQ

Does this PTO clutch replace Dixie Chopper 500144?

Yes. This clutch replaces Dixie Chopper 500144 on compatible Dixie Chopper Zee 2 applications using the same 1-1/8 inch bore, 6 inch class pulley, CCW rotation, and connector style.

Is Ogura GT1A-EH01 the same clutch path?

Yes. Ogura GT1A-EH01 is the Ogura clutch architecture associated with the Dixie Chopper 500144 replacement path.

Does this replace Ogura 53462700?

Yes. Ogura 53462700 is included in this replacement path when the physical specs match the original clutch.

Does this replace Ferris 5100417?

Yes, this clutch path is associated with Ferris 5100417. Ferris applications should still be verified by original part number, mower model, serial range, and physical specs before ordering.

Is Xtreme X0596 the correct replacement?

Use caution. The correct path for this clutch requires a 1-1/8 inch bore. Some catalogs list Xtreme X0596 with conflicting 1-inch bore data. The X0596A 1-1/8 inch bore path is the safer cross-reference when confirming this application.

Is this the same as Dixie Chopper 500012?

No. Dixie Chopper 500012 is a separate clutch path with a larger 7-inch class pulley. Do not merge it with 500144.

Is this the same as Dixie Chopper 500056?

No. Dixie Chopper 500056 is a separate Warner-style clutch path and should not be treated as interchangeable with 500144.

What bore size does this clutch use?

This clutch uses a 1-1/8 inch crankshaft bore. Confirm your crankshaft size before ordering.

What pulley diameter does this clutch use?

This clutch uses a 6 inch to 6-1/8 inch pulley diameter, depending on measurement method. Match your original clutch and belt setup before ordering.

What rotation does this clutch use?

This clutch uses counter-clockwise rotation, commonly written as CCW. Match rotation before installing a replacement.

Can PTO Direct USA help me confirm Dixie Chopper fitment?

Yes. Email support@ptodirectusa.com with your mower model number, serial number, deck size, original clutch number, and clear photos of the old clutch. Include photos of the pulley, bore, wiring connector, and anti-rotation bracket area.

Need help checking crankshaft size? Read the PTO clutch bore size guide.

Need help with rotation? Read the PTO clutch rotation guide.

If your old clutch will not come off the crankshaft, read the PTO clutch stuck on crankshaft guide before prying or hammering.

Need a different Dixie Chopper clutch? Browse the Dixie Chopper PTO clutch collection or the full electric PTO clutch catalog.