MA-GT-DX11CU PTO Clutch Replacement — 1-Inch Bore, CCW
MA-GT-DX11CU PTO Clutch Replacement — 1-Inch Bore, CCW
Overview
This MA-GT-DX11CU PTO clutch replacement is an aftermarket electric clutch for equipment originally fitted with an Ogura MA-GT-DX11CU assembly, also written as MAGTDX11CU.
The original Ogura design was produced for Dixon and uses a 1-inch keyed bore. Replacement catalogs identify this clutch with counter-clockwise rotation. Match the complete original clutch number, key arrangement, pulley alignment, and electrical connection before ordering.
Shopping for an older John Deere 111? If your original clutch is marked MA-GT-JD2, use our MA-GT-JD2 PTO clutch listing for that application.
Original Clutch Reference Specifications
- Manufacturer Reference: Ogura MA-GT-DX11CU
- Crankshaft Bore: 1 inch / 25.4 mm
- Key Arrangement: internal bore keyway for a separate shaft key
- Original Pulley Diameter: 135.7 mm / approximately 5.34 inches
- Rotation: CCW — counter-clockwise
- Electrical System: 12V DC
- Assembly Type: electric PTO clutch and brake
Compatible Applications
This listing is organized around the original clutch number. It covers supported equipment using an Ogura MA-GT-DX11CU clutch with the matching shaft, mounting, pulley, and wiring configuration.
Dixon owners: Confirm the clutch label or the OEM parts diagram for your complete mower model and serial number. A Dixon model name or similar-looking clutch alone does not establish compatibility.
Keyway check: The original DX11CU has a groove inside the clutch bore for a separate shaft key. Match that arrangement before ordering.
Original Manufacturer References
- Ogura: MA-GT-DX11CU
- Alternate Number Format: MAGTDX11CU
Aftermarket Cross Reference
- Xtreme: X0703
Cross-reference numbers identify replacement applications. They do not mean this aftermarket clutch is manufactured by Ogura or Xtreme.
How to Confirm Fitment
- Read the original clutch label. Confirm the complete MA-GT-DX11CU number, including its suffix.
- Check the shaft and key. Confirm the 1-inch bore and matching key arrangement.
- Compare the pulley position. Check diameter, belt groove, and alignment with the mower’s belt drive.
- Compare the mounting and wiring. Check the anti-rotation bracket, connector, wire routing, and available clearance.
Need help identifying yours? Text 541-361-8778 with a clear clutch-label photo, mower model and serial tag, and photos of the connector and mounting area. You can also visit our Parts Desk.
Why Buy From PTO Direct USA?
- Fitment support before and after purchase
- Text and photo help: compare your original clutch with the replacement before ordering
- Fast USA shipping
- Fitment Guarantee: review the coverage and requirements for your order
- Detailed product photos: inspect the bore, pulley, connector, and mounting features
- Installation resources: practical guidance for replacing your PTO clutch
Frequently Asked Questions
Is this a genuine Ogura clutch?
No. This is an aftermarket replacement for the Ogura MA-GT-DX11CU. The Ogura number identifies the original assembly it replaces.
Does this fit every Dixon mower?
No. Dixon used different clutch configurations. Match the complete original clutch number and your mower’s mounting arrangement.
Is MA-GT-DX11CU another name for MA-GT-JD2?
They are separate Ogura model numbers. For equipment originally fitted with MA-GT-JD2, see our JD2 replacement listing and follow its fitment guidance.
What if the clutch label is missing?
Send your mower model and serial number, along with photos of the old clutch, to our Parts Desk. The OEM parts diagram and physical measurements can help identify the correct replacement.
Installation help: Read our PTO clutch installation guide.
Need another clutch? Browse the full electric PTO clutch catalog.