890-914C / 839-329C PTO Clutch Replacement for Land Pride Accu-Z ZT60 & ZT72 | Warner 5218-219
890-914C / 839-329C PTO Clutch Replacement for Land Pride Accu-Z ZT60 & ZT72 | Warner 5218-219
Overview
This 890-914C PTO clutch replacement is an aftermarket electric clutch for select Land Pride Accu-Z commercial zero-turn mowers. It is intended for applications specifying Land Pride 890-914C or the corresponding Warner 5218-219 clutch.
It also covers earlier 839-329C applications where Land Pride parts information specifies 890-914C as the replacement. Applicable mower families include select ZT60, ZT72, ZT60i, and ZT72i configurations.
The assembly features a 1-1/8-inch crankshaft bore, single-groove pulley measuring approximately 6-1/8 inches outside diameter, clockwise rotation viewed from the pulley side, and a reverse-mount configuration.
Confirm your original clutch number Accu-Z models can use different clutch and mounting arrangements.
Key Features
- Aftermarket electric PTO clutch replacement for select Land Pride Accu-Z applications
- Primary OEM Reference: Land Pride 890-914C
- Earlier OEM Reference: 839-329C on applicable superseded applications
- Manufacturer Cross-Reference: Warner 5218-219
- Crankshaft Bore: 1-1/8 inches / 1.125 inches
- Measured Pulley Outside Diameter: approximately 6-1/8 inches / 6.125 inches
- Pulley Type: single-groove V-belt pulley
- Belt Width: 5/8-inch belt on supported applications; use the OEM-specified belt for your mower
- Rotation: clockwise (CW), viewed from the pulley side
- Mounting Style: reverse mount
- Voltage: 12V DC
- Connector: flat side-by-side at clutch or optional wire harness to extend to T-plug
- Integrated electromagnetic clutch and brake assembly
Compatible Land Pride Applications
This replacement is intended for select Land Pride Accu-Z mowers specifying 890-914C, including applicable configurations of:
- Land Pride Accu-Z ZT60
- Land Pride Accu-Z ZT72
- Land Pride Accu-Z ZT60i
- Land Pride Accu-Z ZT72i
Earlier Accu-Z applications specifying 839-329C are covered only where the parts diagram for the mower’s model and serial number identifies 890-914C as the replacement.
Do not select a clutch by deck size or the Accu-Z name alone. Match the original clutch number, engine configuration, mounting arrangement, and electrical connection.
OEM Part Number References
- Land Pride: 890-914C
- Alternate catalog formatting: 890914C
- Earlier Land Pride reference: 839-329C, where superseded to 890-914C for the applicable mower
- Alternate catalog formatting: 839329C
Manufacturer Cross-Reference
- Warner Electric: 5218-219
- Warner Electric: 5218219
Aftermarket Cross-Reference
- Xtreme: X0513
Before You Order
Compare your original clutch with the product photos and confirm:
- The clutch number matches the application listed above
- Your mower’s model and serial number support the replacement
- The crankshaft requires a 1-1/8-inch bore
- The bore, key arrangement, and mounting spacers match your installation
- The mower uses a single-groove, reverse-mount clutch
- Rotation is CW when viewed from the pulley side
- The belt groove, pulley offset, and mounting height suit your mower
- The electrical connector and anti-rotation connection match the installation
Need help comparing your clutch? Send us the mower model, serial number, original clutch number, and clear photos before ordering.
What’s Included
- Complete aftermarket electric PTO clutch assembly
- Integrated single-groove pulley
- Pre-installed bearing assembly
- Electromagnetic coil and brake assembly
- Flat side-by-side clutch connector
- Optional wire harness extension
Follow your mower’s service instructions for the required mounting hardware, spacer arrangement, and installation order.
Why Buy From PTO Direct USA?
- Fast USA shipping
- Fitment Guarantee
- Fitment support before and after purchase
- Clear product photos for easier clutch identification
- Support for homeowners, commercial operators, and mower repair professionals
FAQ
Does this PTO clutch replace Land Pride 890-914C?
Yes. This aftermarket clutch is offered as a replacement for Land Pride 890-914C on supported applications. Confirm your original clutch number and physical configuration before ordering.
Does this replace Land Pride 839-329C?
It covers 839-329C applications where Land Pride specifies 890-914C as the replacement. Check the parts diagram for your mower’s complete model and serial number, since serial-number restrictions can apply.
Does this fit every Land Pride Accu-Z mower?
No. Accu-Z mowers use different clutch configurations depending on model, serial number, and engine package. Match the original clutch number rather than relying on the mower family or deck size alone.
Why do some reference specifications list a 6.3-inch pulley?
Warner lists a 6.31-inch outside diameter for its 5218-219 clutch. The aftermarket unit offered here has a measured outside diameter of approximately 6.125 inches.
Outside diameter and the working diameter where the belt rides are different measurements. For belt speed, the critical measurement is that working diameter—not the outer flange edge. The belt groove and pulley alignment must also match the application. This aftermarket clutch is designed to replace the OEM and manufacturer part numbers listed here.
What bore size does this clutch use?
This clutch has a 1-1/8-inch crankshaft bore, also written as 1.125 inches. Match the bore and key arrangement to your original clutch.
Is this a reverse-mount clutch?
Yes. This replacement uses a reverse-mount configuration. Follow the mounting orientation and spacer arrangement specified for your mower. Product-photo orientation is not an installation diagram.
What belt should I use?
Use the OEM-specified belt for your exact mower and deck configuration. Belt width, length, and profile must suit the complete drive system.
Can PTO Direct USA help confirm Land Pride fitment?
Yes. We provide fitment support before and after purchase. Email support@ptodirectusa.com with your mower model, serial number, engine information, and original clutch number. Photos of the clutch label, bore, pulley, connector, and anti-rotation connection help us compare the installation.