742P05094-L low-lift mower blades that fit select Cub Cadet, MTD, Craftsman, and Troy-Bilt lawn tractors and zero-turn mowers

742P05094-L / 490-110-C200 Low-Lift Blades for Cub Cadet 50-Inch Deck | 3-Pack

$42.95
Skip to product information
742P05094-L low-lift mower blades that fit select Cub Cadet, MTD, Craftsman, and Troy-Bilt lawn tractors and zero-turn mowers
  • 742P05094-L low-lift mower blades that fit select Cub Cadet, MTD, Craftsman, and Troy-Bilt lawn tractors and zero-turn mowers
742P05094-L / 490-110-C200 Low-Lift Blades for Cub Cadet 50-Inch Deck | 3-Pack

742P05094-L / 490-110-C200 Low-Lift Blades for Cub Cadet 50-Inch Deck | 3-Pack

$42.95

Overview

These 742P05094-L low-lift mower blades fit select Cub Cadet, MTD, Craftsman, and Troy-Bilt lawn tractors and zero-turn mowers using the later 50-inch deck system with S-shaped blade centers.

This listing includes three low-lift blades, providing one complete blade replacement for a compatible three-blade 50-inch mower deck.

Each blade replaces the 742P05094-L / 742-05094-L blade path. The complete three-blade set cross-references packaged numbers 490-110-C200, 490-110-F200, 490-110-Y200, and CMXGZAM110200.

Important: This is the low-lift sand-blade path. Do not confuse it with the standard 742P05094 high-lift blade or the 742P05094-X Xtreme blade. Match the complete part-number suffix and S-shaped center pattern before ordering.

Key Features

  • Aftermarket low-lift sand-blade set
  • Primary Blade Number: 742P05094-L
  • Packaged Set Number: 490-110-C200
  • Quantity Included: Three mower blades
  • Deck Cutting Width: 50 inches
  • Blade Length: Approximately 17.27 inches
  • Center Pattern: S-shaped center hole
  • Blade Category: Sand blade
  • Blade Type: Low lift
  • Blades Required Per Deck: Three

Replaces These Blade Numbers

Individual Blade Numbers

  • 742P05094-L
  • 742-05094-L

Three-Blade Set Numbers

  • 490-110-C200
  • 490-110-F200
  • 490-110-Y200
  • CMXGZAM110200

Search-Friendly Number Formats

  • 742P05094L
  • 74205094L
  • 490110C200
  • 490110F200
  • 490110Y200

Blade Specifications

  • Blade Length: Approximately 17.27 inches
  • Center Hole: S-shaped mounting pattern
  • Blade Style: Low lift
  • Blade Category: Sand blade
  • Deck Size Path: 50 inches
  • Deck Blade Count: Three
  • Quantity Included: Three blades

Compatible Cub Cadet Model Families

These low-lift blades are used on select later-production Cub Cadet 50-inch mower decks with the S-shaped blade-mounting system, including applications within the following families:

  • Cub Cadet Enduro XT1 LT50 FAB
  • Cub Cadet Ultima ZT1 50 FAB
  • Cub Cadet Ultima ZT2 50 FAB
  • Cub Cadet Ultima ZTS1 50 FAB
  • Cub Cadet Ultima ZTS2 50 FAB

Confirmed ZT1 50 model-number paths include:

  • 17AIEACL010
  • 17RIEACL010
  • 17AREACLA10
  • 17AIEACLA10

Additional Brand Applications

The same blade-number path may also appear on select 50-inch Craftsman, Troy-Bilt, MTD, and DeWalt mower decks using three S-shaped blades.

Fitment note: Model names and deck sizes are only starting points. Confirm the original blade number, center pattern, complete mower model number, and parts diagram before ordering.

When to Choose Low-Lift Blades

Low-lift sand blades generate less upward airflow than standard high-lift blades. They are commonly selected for dry, dusty, or sandy mowing conditions where reduced suction and reduced dust movement are preferred.

  • Designed for dry or sandy mowing conditions
  • Raises less dust than a standard ultra-high-lift blade
  • Reduces the amount of abrasive sand pulled through the mower deck
  • Suitable for side-discharge mowing when the original application calls for low-lift blades

Low-lift blades generally create less airflow for bagging and grass collection. Use the standard 742P05094 high-lift blade when maximum lift and bagging performance are required.

Blade Style Comparison

742P05094-L Low Lift

The blade sold in this listing. Designed for dry, dusty, or sandy conditions with reduced deck airflow.

742P05094 High Lift

The standard ultra-high-lift blade path. Produces more airflow for side discharge, grass collection, and bagging.

742P05094-X Xtreme

The Xtreme cutting-profile option for enhanced mulching and general-purpose cutting performance.

All three blade styles may use similar overall dimensions and the later S-shaped center system, but they are different cutting profiles. Match the complete blade suffix and select the style appropriate for your mowing conditions.

Cub Cadet ZT1 50 Fitment Note

Later Cub Cadet ZT1 50 mower decks use the S-shaped blade and spindle system. These 742P05094-L low-lift blades are an optional sand-blade choice for that later deck path.

Earlier ZT1 50 model 17AIEACZ010 uses 942-05052A six-point-star blades with 918-06980 spindles. These S-shaped blades will not fit that earlier six-point-star spindle system.

Before Ordering

Before ordering these mower blades, confirm all of the following:

  • The original blade number is 742P05094-L or 742-05094-L.
  • The original packaged blade-set number is 490-110-C200, 490-110-F200, 490-110-Y200, or CMXGZAM110200.
  • Each original blade measures approximately 17.27 inches long.
  • The original blades use an S-shaped center hole.
  • The mower uses three blades on its 50-inch deck.
  • You want the low-lift sand-blade profile rather than the standard high-lift or Xtreme cutting profile.
  • The spindle shafts, blade bolts, washers, and mower deck are in usable condition.

Compare the replacement blades directly with the original blades before installation. Do not install the blades until fitment is fully confirmed.

What Is Included

  • Three aftermarket 742P05094-L low-lift mower blades

Common Symptoms of Worn Mower Blades

  • Grass tears instead of cutting cleanly
  • Uneven or streaked cut quality
  • Rounded or heavily worn cutting edges
  • Visible cracks, bends, or impact damage
  • Reduced cutting performance in thick grass
  • Excessive deck vibration caused by a bent or unbalanced blade

Installation Notes

  • Park the mower on a level surface and remove the ignition key.
  • Disconnect the spark-plug lead before working underneath the mower deck.
  • Mark the original blade orientation before removal.
  • Inspect the spindle shafts, blade bolts, washers, and deck shell.
  • Compare the new blade length and S-shaped center pattern with the original blades.
  • Install the cutting edges in the correct rotation direction.
  • Tighten the blade hardware to the mower manufacturer’s specified torque.
  • Rotate the blades manually to confirm proper deck clearance before operating the mower.

FAQ

What blade numbers do these replace?

Each blade replaces 742P05094-L and 742-05094-L. The complete three-blade set replaces packaged numbers 490-110-C200, 490-110-F200, 490-110-Y200, and CMXGZAM110200.

How many blades are included?

This listing includes three low-lift blades, providing one complete blade replacement for a compatible three-blade 50-inch mower deck.

How long are the blades?

Each blade measures approximately 17.27 inches long.

What center hole do these blades use?

These blades use the later S-shaped center-hole pattern. They do not fit earlier six-point-star spindle shafts.

Are these sand blades?

Yes. Cub Cadet categorizes the 742P05094-L as a low-lift sand blade for 50-inch mower decks.

What is the benefit of a low-lift blade?

A low-lift blade generates less upward airflow than a high-lift blade. This can reduce dust and the amount of abrasive sand circulated through the mower deck in dry or sandy mowing conditions.

Are low-lift blades good for bagging?

Low-lift blades create less suction than high-lift blades, so they are generally not the preferred choice when maximum grass collection and bagging performance are required.

What is the difference between 742P05094 and 742P05094-L?

The 742P05094 is the standard ultra-high-lift blade path. The 742P05094-L is the low-lift sand-blade path sold in this listing. They use different cutting profiles and are intended for different mowing conditions.

What is the difference between 742P05094-L and 742P05094-X?

The 742P05094-L is a low-lift sand blade designed to reduce deck airflow and dust. The 742P05094-X is an Xtreme cutting-profile blade intended for enhanced mulching and general-purpose cutting.

Do these fit a Cub Cadet ZT1 50?

They fit later Cub Cadet ZT1 50 mower decks using the S-shaped blade system. They do not fit the earlier 17AIEACZ010 path using six-point-star 942-05052A blades and 918-06980 spindles.

Can I order these blades using the 50-inch deck size alone?

No. Cub Cadet produced multiple 50-inch blade and spindle systems. Match the complete blade number, blade length, center-hole pattern, blade count, and mower model before ordering.

Related Cub Cadet ZT1 50 Parts

Need help confirming fitment? Contact PTO Direct USA with your complete mower model number, deck size, original blade number, and a clear photo of the blade center before ordering.

You may also like