50-Inch Deck Rebuild Kit for Toro TimeCutter MX5000, MX5060, SS5000 & SS5060 | 119-8820 Belt

Overview

This 50-inch deck rebuild kit is built for select Toro TimeCutter MX5000, MX5060, SS5000, SS5035, SS5060, SW5000, and related 50-inch Toro mower deck applications using the listed belt, blade, spindle, and idler pulley part numbers.

The kit includes the main wear parts commonly replaced during a mower deck refresh: 3 spindle assemblies, 3 mower blades, 3 idler pulleys, and 1 deck drive belt.

This is a good option when your 50-inch Toro mower deck has noisy spindle bearings, worn blades, slipping belts, noisy idler pulleys, uneven cut quality, deck vibration, or multiple deck parts that need to be replaced at the same time.

Important: Match your mower model, deck size, blade count, and original deck part numbers before ordering. Many Toro TimeCutter decks look similar but use different belts, blades, spindle assemblies, idler pulleys, and mounting setups.

Kit Includes

• 3 spindle assemblies with mounting bolts
• 3 mower blades
• 3 idler pulleys
• 1 deck drive belt

Compatible Brands & Model Series

This deck rebuild kit is intended for select 50-inch Toro TimeCutter mower decks using the listed replacement part numbers.

• Toro TimeCutter: MX5000, MX5060, SS5000, SS5035, SS5060, and SW5000 50-inch deck applications
• Toro / Exmark part-number path: select applications using the listed spindle, belt, blade, and idler pulley replacement numbers

Fits Select Toro Models

• TimeCutter MX5000
• TimeCutter MX5060
• TimeCutter SS5000
• TimeCutter SS5035
• TimeCutter SS5060
• TimeCutter SW5000

Fitment note: Model names are provided as fitment clues. Always confirm your 50-inch deck and original deck part numbers before ordering.

Replaces Common Deck Belt Numbers

• Toro / Exmark: 119-8820
• Additional Supplier Reference: 120-3892

Belt Size: 1/2 inch x 141-1/2 inches

Belt note: Supplier data lists 119-8820 as the main belt replacement number and also references 120-3892. Match your original belt number and belt size before ordering.

Replaces Common Blade Numbers

• Toro: 110-6837-03, 112-9759-03
• Additional Supplier References: 115-5059-03, 12273

Blade Specs: 17-1/2 inch blade, 2-1/4 inch width, .165 inch thickness, 5/8 inch center hole.

Replaces Common Spindle Assembly Numbers

• Toro / Exmark: 117-0751, 117-7267, 117-7268, 117-7439, 121-0751
• Additional Reference: 285-923

Spindle note: This kit includes spindle assemblies with mounting bolts. Confirm your spindle mounting pattern, pulley setup, blade mount, and deck shell condition before installation.

Replaces Common Idler Pulley Numbers

• Toro: 106-2175, 132-9420

Idler note: This kit includes 3 idler pulleys. Confirm your original idler pulley numbers, pulley locations, and belt routing before ordering.

Before Ordering

Before ordering this 50-inch deck rebuild kit, confirm:

• Your mower uses a 50-inch 3-blade deck
• Your mower is in the Toro TimeCutter MX5000, MX5060, SS5000, SS5035, SS5060, or SW5000 model family
• Your original belt number matches 119-8820 or another listed belt reference
• Your blade numbers match the 110-6837-03 / 112-9759-03 blade path
• Your spindle numbers match the 117-7267 / 117-7268 / 117-7439 spindle path
• Your idler pulley numbers match the 106-2175 / 132-9420 idler pulley path
• Your blade center hole and blade length match the listed blade specifications
• Your deck shell, belt guides, spindle mounting holes, idler pulley locations, and tension system are in usable condition

Do not install parts until fitment is confirmed. Installed deck parts may not be eligible for return.

Common Symptoms This Kit Helps Fix

• Noisy spindle bearings
• Deck vibration
• Uneven cut quality
• Dull, bent, cracked, or worn blades
• Deck belt slipping, squealing, or jumping off
• Noisy or loose idler pulleys
• Blade wobble or bearing play
• Worn spindle assemblies
• Multiple deck parts worn at the same time

Installation Notes

• Park the mower on a level surface and disconnect the spark plug before working on the deck
• Take photos of the belt routing before removing old parts
• Inspect the deck shell for cracks, wallowed holes, rust damage, or bent mounting areas
• Check spindle mounting bolts, blade bolts, washers, belt guides, idler arms, and tension springs
• Compare the new parts to your original parts before installation
• Confirm all idler pulleys are installed in the correct locations before routing the belt
• After installation, rotate the blades by hand with the mower off to confirm there is no contact or binding
• Test the mower at low speed first and listen for vibration, belt tracking issues, squealing, or unusual noise

Why Buy From PTO Direct USA?

• Fast USA shipping
• Fitment-first product descriptions
• Clear part-number routing for mower deck repairs
• Deck parts organized by belts, blades, spindles, pulleys, and rebuild kits
• Support for homeowners, repair shops, and mower owners

Need Help Confirming Fitment?

If you are unsure whether this kit fits your mower, send us your mower model number, deck size, blade count, and photos of your original belt, blades, spindles, idler pulleys, mower deck, and mower ID tag before ordering.

FAQ

Does this fit Toro TimeCutter MX5000?

Yes, this kit is intended for select Toro TimeCutter MX5000 50-inch deck applications using the listed belt, blade, spindle, and idler pulley part numbers. Confirm your original parts before ordering.

Does this fit Toro TimeCutter MX5060?

Yes, this kit is listed for select Toro TimeCutter MX5060 50-inch mower decks. Match your original belt, blade, spindle, and idler pulley numbers before ordering.

Does this fit Toro TimeCutter SS5000, SS5035, or SS5060?

Yes, this kit is commonly listed for select SS5000, SS5035, and SS5060 50-inch deck applications using the listed part-number path.

Does this kit include idler pulleys?

Yes. This kit includes 3 idler pulleys replacing the 106-2175 / 132-9420 idler pulley path.

What belt comes in this kit?

This kit includes a deck belt replacing 119-8820. Supplier data also references 120-3892. The listed belt size is 1/2 inch x 141-1/2 inches.

What blades come in this kit?

This kit includes three blades replacing the 110-6837-03 / 112-9759-03 blade path. The blades are listed as 17-1/2 inches with a 5/8 inch center hole.

What spindle numbers does this kit replace?

This kit includes three spindle assemblies replacing the 117-7267 / 117-7268 / 117-7439 spindle path, along with related numbers listed above. Confirm your original spindle number and mounting pattern before ordering.

Are spindle mounting bolts included?

Yes, supplier data lists the spindle assemblies as included with mounting bolts. Compare the included hardware to your original hardware before installation.

How many blades and spindles are included?

This kit includes 3 mower blades, 3 spindle assemblies, 3 idler pulleys, and 1 deck belt.

Can I order this kit by mower appearance?

No. Do not order by appearance alone. Match your mower model, deck size, blade count, belt number, blade number, spindle number, idler pulley numbers, and deck layout whenever possible.

Need individual deck parts instead? Browse mower deck belts, mower blades, spindle assemblies, and deck pulleys and idlers.

Need a different deck setup? Browse the full mower deck parts catalog.