07220500 Deck Belt for Gravely, Ariens, John Deere, Cub Cadet, MTD, Scag & Snapper

Overview

This 07220500 deck belt replacement is built for select Gravely, Ariens, John Deere, Cub Cadet, MTD, Ryobi, Simplicity, Snapper, Toro, and Scag mower applications using the listed belt replacement path.

This belt also replaces 041200, 722050, M41642, M84223, 754-3073, 954-3073, 754-0198, 954-0198, 754-0326, 954-0326, 48760, and related numbers listed below. Depending on the mower model, this belt may be used as a deck belt or drive belt.

Important: This is a broad multi-brand belt path. Do not order by brand, deck size, or mower appearance alone. Match your original belt number first, then confirm belt length, belt width, mower model, deck size, serial range, belt location, and belt routing before ordering.

Key Features

• Replacement mower belt for select deck belt and drive belt applications
• Primary Part Number: 07220500
• Also Replaces: 041200, 722050, M41642, M84223, 754-3073, 954-3073, 48760
• Quantity Included: 1 replacement belt
• Length: 62 inches
• Width: 1/2 inch
• Designed for mower belt systems using the listed OEM belt path
• Ships as one belt only

Compatible Brands & Model Series

This belt is intended for select mower applications using the 07220500, 041200, 722050, M41642, M84223, 754-3073, 48760, or related replacement belt path.

Common supplier application paths include:

• John Deere: select 116, 116H, 240, 245, 260, 265, 285, and 320 mower deck applications using the M41642 / M84223 belt path
• Gravely: select 36-inch 2-wheel, Sport ZT 40-inch, Pro-Master, and grass bagger applications using the 041200 / 07220500 / 722050 belt path
• Ariens: select Sport Zoom, RER, YT 1542, YT 1742, and 48-inch grass bagger / collection system applications
• Cub Cadet: select 42-inch tractor applications including 214, 2140, 2145, 2150, 2155, 2164, 2166, 2176, GT 2542, LT 2042, and LT 2180 paths
• MTD / Ryobi: select riding mower and lawn tractor applications using the 754-0198, 754-0326, 954-0198, 954-0326, and 754-3073 belt paths
• Simplicity: select AGCO Scamp, Wonderboy, and related drive belt applications using the listed Simplicity belt path
• Snapper: select R5000, R5001, R5002, R8000, R8001, R8002, RT 5, and RT 8 drive belt applications
• Toro: select 25-inch applications using the 7-3476 belt path
• Scag: select SMZ, SSZ, and related mower applications using the 48760 belt path

Serial range note: Several John Deere, Gravely, Ariens, Cub Cadet, and Scag applications use serial-number breaks. Confirm your mower model, deck size, serial range, original belt number, and belt routing before ordering.

Fitment note: Model names, deck sizes, and serial ranges are provided as fitment clues only. Always confirm the original belt number, belt size, belt location, and routing before ordering.

Replaces OEM Belt Numbers

• Gravely: 041200, 07220500, 722050
• Ariens: 041200, 07220500, 722050
• John Deere: M41642, M84223
• MTD: 754-0198, 754-0326, 954-0198, 954-0326, 754-3073, 954-3073, 1651-15, 1651-53, 2651-15
• Cub Cadet: 7543073, 754-3073, 954-3073
• Simplicity: 105115, 105115SM, 177452, 177452SM, 2029660, 2029660SM, 2177452, 2177452SM
• Snapper: 1-4353, 1-4686, 7014353, 7014353YP, 7014686, 7014686YP
• Toro: 7-3476
• Scag: 48760

No-Dash Search Aliases

• 07220500
• 722050
• 7540198
• 9540198
• 7540326
• 9540326
• 7543073
• 9543073
• 7014353
• 7014353YP
• 7014686
• 7014686YP

Belt Specifications

• Part Type: mower belt
• Primary Replacement Number: 07220500
• Common Cross-Reference Numbers: 041200, 722050, M41642, M84223, 754-3073, 954-3073, 48760
• Length: 62 inches
• Width: 1/2 inch
• Quantity Included: 1 replacement belt

Before Ordering

Before ordering this belt, confirm:

• Your original belt number matches 07220500, 041200, 722050, or one of the listed replacement numbers
• Your mower uses this belt in the correct location: deck belt, attachment belt, or drive belt path
• Your mower deck or drive system uses the correct belt routing
• Your mower model, deck size, and serial range match the listed application path
• Your idler pulleys, spindle pulleys, drive pulleys, belt guides, and tension spring are in good condition
• Your original belt length and width match the listed specifications

Do not install the belt until fitment is confirmed. Installed belts may not be eligible for return.

Common Symptoms of a Worn Belt

• Belt slips under load
• Belt squeals when the blades or drive system are engaged
• Mower leaves uneven or uncut grass
• Belt jumps off the pulley system
• Visible cracking, glazing, or fraying
• Deck vibration, poor blade speed, or poor drive response
• Burning rubber smell near the deck or drive belt system

Installation Notes

• Park the mower on a level surface and disconnect the spark plug before working on the deck or belt drive
• Take a photo of the belt routing before removing the old belt
• Inspect idler pulleys, spindle pulleys, drive pulleys, belt keepers, and the tension spring before installing the new belt
• Make sure the belt is seated fully in each pulley groove
• After installation, test the mower at low speed and listen for belt tracking issues, squealing, or vibration

Why Buy From PTO Direct USA?

• Fast USA shipping
• Fitment-first product descriptions
• Clear part-number routing for mower deck and drive belt repairs
• Deck parts organized by belts, blades, spindles, pulleys, and rebuild kits
• Support for homeowners, repair shops, and mower owners

Need Help Confirming Fitment?

If you are unsure whether this belt fits your mower, send us your mower model number, deck size, original belt number, serial number, belt location, and photos of your belt routing diagram, mower ID tag, and old belt before ordering.

FAQ

What does this belt replace?

This belt replaces 07220500, 041200, and 722050 on select Ariens and Gravely applications. It also replaces related numbers including M41642, M84223, 754-3073, 954-3073, 48760, 7014353YP, and 7-3476 on supported applications.

What size is this belt?

This belt is listed at 62 inches long and 1/2 inch wide. Always compare the belt size and routing to your original belt before ordering.

Is this a deck belt or a drive belt?

Depending on the mower model, this belt may be used as a deck belt, attachment belt, or drive belt. Match the original belt number and belt routing location before ordering.

Does this belt fit John Deere mower decks?

This belt is commonly listed for select John Deere 116, 116H, 240, 245, 260, 265, 285, and 320 mower deck applications using the M41642 / M84223 belt path. Confirm your original belt number and serial range before ordering.

Does this belt fit Cub Cadet 42-inch mower decks?

This belt is commonly listed for select Cub Cadet 42-inch tractor applications using the 754-3073 / 954-3073 belt path. Confirm your mower model, serial range, original belt number, and routing before ordering.

Does this belt fit Scag mower applications?

This belt is commonly listed for select Scag SMZ and SSZ mower applications using the 48760 belt path. Many Scag applications are serial-range specific, so confirm your model and serial range before ordering.

Can I order this belt by deck size only?

No. Deck size is only a starting point. This belt appears across multiple brands and both deck-drive and drive-belt applications, so match the original belt number, belt length, mower model, belt location, serial range, and belt routing before ordering.

Why does my belt keep coming off?

A belt may come off because of worn idler pulleys, bad bearings, weak tension springs, bent belt guides, incorrect routing, or the wrong belt size. Inspect the full belt drive system before installing a new belt.

Need other deck parts for this setup? Browse mower blades, spindle assemblies, deck pulleys and idlers, and deck rebuild kits.

Need a different belt? Browse the full mower deck belts collection.