Overview
This quick-reference guide covers John Deere Z930A ZTrak Pro Series zero-turn mowers in parts catalog PC10333 with a 60-inch 7-Iron, 60-inch Mulch On Demand, or 72-inch 7-Iron mower deck.
The Z930A PTO clutch is separated by a real mower serial-number break. Machines through serial 020000 use the early TCA20380 clutch path. Machines beginning with serial 020001 use the later TCA20605 / TCA21166 / TCA22879 / AUC11007 family. The later family also has several Deere service-clutch and mounting-hardware revisions, so the serial number comes first and the installed clutch, hub, rod, and bracket are the second check.
Deck parts require one more distinction: identify the deck as 60-inch standard, 60-inch Mulch On Demand, or 72-inch. The 020000 / 020001 mower serial break also separates the early and later deck-belt and traction-belt paths.
Quick Answer
Use the last six digits of the mower PIN as the serial number. Do not start with the number marked on a replacement clutch; a previous repair may have installed a superseding part and updated mounting hardware.
Table tip: On a phone, swipe sideways to see all columns.
| Z930A Mower Serial | Correct Clutch Family | Deere Number Path | PTO Direct Product |
|---|---|---|---|
| XXXXXX–020000 | Early Z930A clutch | TCA16999 → TCA19141 → TCA20380 Warner 5228-3 / Xtreme X0803 |
Shop TCA20380 PTO Clutch |
| 020001–XXXXXX | Later Z930A clutch | TCA20605 → TCA21166 → TCA22879 AUC11007 is in this same X0807 replacement family Current Deere service path continues through AUC18216, AUC18452 and AUC20538 |
Shop AUC11007 PTO Clutch Direct replacement for TCA20605 / TCA21166 / TCA22879 / AUC11007 |
Bottom line: A Z930A at serial 020000 or below belongs to the TCA20380 family. A Z930A at serial 020001 or above belongs to the later AUC11007/X0807 family.
How to Read the Z930A Serial Number
- Find the mower identification tag and confirm the model is Z930A.
- Record the complete PIN.
- Use the last six digits to place the mower through 020000 or from 020001.
- Identify the deck as 60-inch standard, 60-inch Mulch On Demand, or 72-inch.
- Inspect the installed clutch number, connector, hub, anti-rotation rod, and bracket to determine which service revision is present.
Example: A PIN ending in 019850 uses the early clutch and belt paths. A PIN ending in 020001 uses the later clutch and belt paths.
John Deere Z930A PTO Clutch Breakdown
Z930A Through Serial 020000: TCA20380 Path
- Original and superseded Deere numbers: TCA16999, TCA19141, TCA20380
- Warner reference: 5228-3
- Xtreme reference: X0803
- Crankshaft bore: 1-1/8 inches
- Rotation: counter-clockwise when viewed from the pulley side
Use the TCA20380 PTO clutch replacement for Z930A mowers through serial 020000. If the machine still has the oldest TCA16999 installation, inspect the clutch kit, anti-rotation rod, hardware, and wiring because Deere's service instructions may call for conversion parts with the later clutch.
Z930A Serial 020001 and Higher: AUC11007 / X0807 Path
- Confirmed replacement family: TCA20605, TCA21166, TCA22879, AUC11007
- Current Deere service references: AUC18216, AUC18452, AUC20538
- Warner references: 5228-38, 5228-55
- Xtreme reference: X0807
- Crankshaft bore: 1-1/8 inches
- Pulley diameter: approximately 6-5/8 inches
- Rotation: counter-clockwise when viewed from the pulley side
Use the AUC11007 PTO clutch replacement for Z930A mowers beginning with serial 020001 when the installed or superseded clutch is TCA20605, TCA21166, TCA22879, or AUC11007. If the mower is already fitted with AUC18216, AUC18452, or AUC20538, confirm the current clutch and mounting-hardware package before ordering; those newer Deere service numbers are not automatically included in the PTO Direct AUC11007 listing.
Later-Clutch Hub and Anti-Rotation Hardware
The later clutch family changed service hardware over time. This is why two serial-020001-and-up Z930A mowers may not look identical even though both belong to the later clutch path.
| Installed or Service Clutch | Deere Hardware Distinction | Ordering Check |
|---|---|---|
| TCA20605 | Superseded to TCA21166 | Inspect the existing hub and anti-rotation setup before installing the replacement clutch. |
| TCA21166 | Deere catalog identifies hub TCU22547 for use with TCA21166 | Do not assume a hub from another service revision is correct. |
| TCA22879, AUC18216, or AUC18452 | Deere catalog identifies hub TCU35895 with these clutch revisions | Confirm the hub, pulley alignment, rod, and bracket as a matched installation. |
| AUC11007 | Deere substitutes AUC18216; service history may include updated hardware | Use the mower serial plus the installed hub and anti-rotation hardware. |
| AUC20538 | Current Deere service-clutch endpoint in the Z930A catalog | Verify the current PIN-specific installation package before substituting an earlier aftermarket number. |
Deere also revised the anti-rotation parts. Catalog references progress from TCU27124 to TCU30494 and later rod, bushing, and bracket revisions including TCU36198, TCU38608, TCU30547, TCU36163, and UC12038. Use the exact clutch diagram for the installed service revision; do not let the clutch body rotate against its wiring.
Identify the Z930A Mower Deck
| Deck Configuration | How to Distinguish It | Parts-Catalog Section |
|---|---|---|
| 60-inch 7-Iron side-discharge deck | 60-inch cutting width without the operator-controlled Mulch On Demand baffle system | 60-inch mower deck |
| 60-inch Mulch On Demand deck | 60-inch deck with movable internal baffles and the MOD control linkage | 60-inch Mulch On Demand mower deck |
| 72-inch 7-Iron side-discharge deck | 72-inch cutting width with its own belt, blade, sheave, and tension-spring paths | 72-inch mower deck |
Do not order blades from the mower model alone. The standard 60-inch, 60-inch MOD, and 72-inch decks use different blade paths.
Deck and Traction Belt Serial-Number Split
Table tip: On a phone, swipe sideways to see all columns.
| Belt Position | Z930A Mower Serial | Correct Deere Belt | Distinguishing Factor |
|---|---|---|---|
| 60-inch standard or 60-inch MOD deck | XXXXXX–020000 | TCU26297 | Early 60-inch deck-drive configuration; approximately 180-inch effective length |
| 60-inch standard or 60-inch MOD deck | 020001–XXXXXX | TCU29454 | Later 60-inch drive-kit configuration |
| 72-inch deck | XXXXXX–020000 | TCU26298 | Early 72-inch deck-drive configuration; approximately 203-inch effective length |
| 72-inch deck | 020001–XXXXXX | TCU29455 | Later 72-inch drive-kit configuration |
| Traction drive | XXXXXX–020000 | TCU25673 | Early machine traction belt |
| Traction drive | 020001–XXXXXX | TCU28433 | Later machine traction belt |
Belt warning: The mower-deck belt and traction belt are separate components. Match the belt position, deck width, and mower serial range.
John Deere Z930A 60-Inch 7-Iron Deck Parts
| Deck Part | Deere Part Number | Quantity | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| Deck belt, early | TCU26297 | 1 | Contact to inquire about product | Use through mower serial 020000. |
| Deck belt, later | TCU29454 | 1 | Contact to inquire about product | Use beginning with mower serial 020001. |
| High-lift blade | TCU15881 | 3 | Contact to inquire about product | Standard high-lift blade path for the 60-inch side-discharge deck. |
| Self-sharpening high-lift blade | UC15158 | 3 | Contact to inquire about product | Optional Deere blade profile; use three matching blades. |
| Low-lift blade | M133381 | 3 | Contact to inquire about product | Low-lift option for the standard 60-inch deck. |
| High-capacity / standard-lift blade | M128485 | 3 | Contact to inquire about product | Keep this blade profile separate from TCU15881 high-lift and M168223 mulch blades. |
| Mulch blade | M168223 | 3 | Contact to inquire about product | Use with the compatible 60-inch mulching configuration. |
| Spindle service kit | TCA17517 → TCA20639 → TCA24880 | 3 | Shop TCA24880 Spindle Assembly | One spindle at each blade station; confirm the selected package contents. |
| Blade-drive sheave | TCU26967 | Confirm by diagram | Contact to inquire about product | 60-inch sheave; do not substitute the 72-inch TCU26968. |
| Grooved idler | TCA19530 → TCA20602 Use spacer TCU29427 where shown |
Confirm by diagram | Contact to inquire about product | Match the grooved belt-contact position and spacer stack. |
| Flat idler | TCA17524 → AUC16478 | Confirm by diagram | Contact to inquire about product | Match the exact deck location. |
| Secondary idler | TCA17135 → AUC11584 | Confirm by diagram | Contact to inquire about product | Larger idler path; do not interchange with AUC16478. |
| Belt-tension spring | TCU24629 | 1 | Contact to inquire about product | 60-inch deck spring path. |
John Deere Z930A 60-Inch Mulch On Demand Deck Parts
| Deck Part | Deere Part Number | Quantity | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| Deck belt, early | TCU26297 | 1 | Contact to inquire about product | Use through mower serial 020000. |
| Deck belt, later | TCU29454 | 1 | Contact to inquire about product | Use beginning with mower serial 020001. |
| Mulch On Demand blade | TCU18990 | 3 | Contact to inquire about product | Blade path shown for the 60-inch MOD deck; do not assume the standard-deck blade profile. |
| Spindle service kit | TCA17517 → TCA20639 → TCA24880 | 3 | Shop TCA24880 Spindle Assembly | One spindle at each blade station; confirm package contents. |
| Blade-drive sheave | TCU26967 | Confirm by diagram | Contact to inquire about product | 60-inch sheave path. |
| Grooved idler | TCA19530 → TCA20602 Use spacer TCU29427 where shown |
Confirm by diagram | Contact to inquire about product | Match the grooved belt-contact position and spacer stack. |
| Flat idler | TCA17524 → AUC16478 | Confirm by diagram | Contact to inquire about product | Match the exact deck location. |
| Secondary idler | TCA17135 → AUC11584 | Confirm by diagram | Contact to inquire about product | Do not interchange with AUC16478. |
| Belt-tension spring | TCU24629 | 1 | Contact to inquire about product | 60-inch deck spring path. |
MOD deck note: The standard and MOD 60-inch decks share several belt-drive parts, but the baffles, linkage, and blade application differ. Confirm the physical MOD mechanism before ordering blades or discharge-control parts.
John Deere Z930A 72-Inch 7-Iron Deck Parts
| Deck Part | Deere Part Number | Quantity | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| Deck belt, early | TCU26298 | 1 | Contact to inquire about product | Use through mower serial 020000. |
| Deck belt, later | TCU29455 | 1 | Contact to inquire about product | Use beginning with mower serial 020001. |
| High-lift blade | TCU15882 | 3 | Contact to inquire about product | Standard high-lift blade path for the 72-inch side-discharge deck. |
| Self-sharpening high-lift blade | UC15157 | 3 | Contact to inquire about product | Optional Deere blade profile; use three matching blades. |
| Low-lift blade | M141669 | 3 | Contact to inquire about product | Low-lift option for the 72-inch deck. |
| Mulch blade | M142514 | 3 | Contact to inquire about product | Mulching-blade path for the compatible 72-inch configuration. |
| Spindle service kit | TCA17517 → TCA20639 → TCA24880 | 3 | Shop TCA24880 Spindle Assembly | One spindle at each blade station; confirm package contents. |
| Blade-drive sheave | TCU26968 | Confirm by diagram | Contact to inquire about product | 72-inch sheave; do not substitute TCU26967. |
| Grooved idler | TCA19530 → TCA20602 Use spacer TCU29427 where shown |
Confirm by diagram | Contact to inquire about product | Match the grooved belt-contact position and spacer stack. |
| Flat idler | TCA17524 → AUC16478 | Confirm by diagram | Contact to inquire about product | Match the exact deck location. |
| Secondary idler | TCA17135 → AUC11584 | Confirm by diagram | Contact to inquire about product | Do not interchange with AUC16478. |
| Belt-tension spring | TCU27011 | 1 | Contact to inquire about product | 72-inch deck spring path. |
Before Ordering
- Confirm the mower identification tag says John Deere Z930A.
- Use the last six PIN digits to determine whether the mower is through 020000 or from 020001.
- Select the early TCA20380 clutch family or later AUC11007/X0807 family from that serial range.
- On later machines, identify the installed clutch, hub, anti-rotation rod, bracket, and connector revision.
- Identify the deck as 60-inch standard, 60-inch Mulch On Demand, or 72-inch.
- Use the mower serial and deck width together when selecting the deck belt.
- Match blades by deck type, part number, lift profile, length, center hole, and quantity.
- Match every idler by part number, belt-contact surface, spacer stack, and exact diagram position.
- Inspect the deck belt, idlers, spindles, sheaves, and anti-rotation hardware before installing a new clutch.
Common PTO Clutch and Deck Symptoms
- Blades will not engage when the PTO switch is activated
- The clutch clicks but the deck belt does not turn
- Blades disengage after the clutch becomes hot
- Clutch wiring is twisted, pulled, or damaged from failed anti-rotation hardware
- Deck belt slips, squeals, smokes, or repeatedly comes off
- Grinding or bearing noise from a spindle or idler
- Visible pulley wobble or uneven belt tracking
- Deck vibration, uneven cutting, or reduced blade speed under load
Inspect the PTO clutch and mower deck as a complete drive system. A seized spindle, failed idler, incorrect belt, damaged hub, or broken anti-rotation bracket can overload a replacement clutch.
FAQ
What PTO clutch fits a John Deere Z930A through serial 020000?
Z930A mowers through serial 020000 use the TCA20380 clutch family. Earlier numbers in this path include TCA16999 and TCA19141.
What PTO clutch fits a John Deere Z930A beginning with serial 020001?
Z930A mowers beginning with serial 020001 use the later AUC11007 / X0807 clutch family. The PTO Direct replacement covers TCA20605, TCA21166, TCA22879, and AUC11007. Deere's newer service references continue through AUC18216, AUC18452, and AUC20538, so inspect the installed hub and anti-rotation hardware if one of those newer numbers is present.
Why do two later Z930A clutch installations look different?
Deere revised the clutch, hub, anti-rotation rod, bushing, bracket, and wiring service parts. For example, TCU22547 is identified with TCA21166, while TCU35895 is identified with TCA22879, AUC18216, and AUC18452. Treat those components as a matched installation.
What deck belt fits a John Deere Z930A with a 60-inch deck?
The 60-inch standard and 60-inch MOD decks use TCU26297 through mower serial 020000 and TCU29454 beginning with serial 020001.
What deck belt fits a John Deere Z930A with a 72-inch deck?
The 72-inch deck uses TCU26298 through mower serial 020000 and TCU29455 beginning with serial 020001.
What blades fit the John Deere Z930A 60-inch deck?
The standard 60-inch deck lists TCU15881 high-lift, UC15158 self-sharpening high-lift, M133381 low-lift, M128485 high-capacity / standard-lift, and M168223 mulch blade paths. The 60-inch Mulch On Demand deck uses the separate TCU18990 MOD blade path. Confirm the deck before choosing a blade.
What blades fit the John Deere Z930A 72-inch deck?
The 72-inch deck lists TCU15882 high-lift, UC15157 self-sharpening high-lift, M141669 low-lift, and M142514 mulch blade paths. Use three matching blades.
What spindle fits a John Deere Z930A?
Deere's service-kit path progresses from TCA17517 through TCA20639 to TCA24880. M134382 may appear as an internal spindle component in deck diagrams; it is not the same listing as a complete spindle service kit.
Related John Deere Quick References
- John Deere Z925A PTO Clutch and Deck Parts Quick Reference
- John Deere Z920A PTO Clutch and Deck Parts Quick Reference
- John Deere Z910A PTO Clutch and Deck Parts Quick Reference
- John Deere Quick Reference Library
Shop John Deere PTO Clutches and Deck Parts
Browse the John Deere PTO clutch collection or the complete electric PTO clutch catalog.
Browse mower blades, spindle assemblies, deck pulleys and idlers, and mower deck belts.
PTO Direct USA sells aftermarket replacement parts and is not affiliated with or endorsed by Deere & Company. John Deere model names and OEM numbers are used for fitment identification only. Parts and supersessions can change; confirm the complete mower PIN and current parts diagram before ordering.