Quick Answer
The Cub Cadet Z-Force 54 54-inch zero-turn mower uses the 759-05064 electric PTO clutch replacement path for OEM clutch 01008434P when matched to model number 17BF3AGX010. The matching 54-inch fabricated-deck path uses the 01005012P PTO belt, 02000653 deck belt, 02005018 / 942-04416 blades, and 918-04426 spindle assemblies.
This guide is for the confirmed 2011-and-before, 2012, and 2013 Cub Cadet Z-Force 54 model 17BF3AGX010 diagram paths shown below.
Cub Cadet Z-Force 54 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Year Path | Deck Size | OEM PTO Clutch | Service Replacement | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|---|
| Cub Cadet Z-Force 54 | 17BF3AGX010 | 2011 and before 2012 2013 | 54-inch fabricated deck | 01008434P | 759-05064 | 759-05064 PTO Clutch | Confirmed PTO clutch path across the listed Z-Force 54 diagram years for this model number. |
Cub Cadet Z-Force 54 54-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| PTO Belt | 1 | 01004315 / 01005012 / 01005012P | Contact to inquire about product | The diagram shows 01005012, which is currently serviced as 01005012P. This is the engine-to-deck PTO belt. |
| Deck Belt | 1 | 02000653 | 02000653 Deck Belt | This is the spindle-drive belt that routes around the pulleys on the 54-inch fabricated deck. |
| Blade | 3 | 02005018 / 01005337 / 01005337P / 942-04416 | 01005337 / 02005018 / 942-04416 Mower Blades | Uses three matching high-lift blades on this 54-inch Z-Force deck path. |
| Spindle Assembly | 3 | 918-04426 | 918-04426 / 918-3129B Spindle Assembly | Uses three spindle assemblies for this three-blade 54-inch fabricated deck. |
Model Path Note
This Z-Force 54 guide uses the 759-05064 PTO clutch, 01005012P PTO belt, 02000653 deck belt, 02005018 / 942-04416 blades, and 918-04426 spindle assemblies. Keep this path separate from Z-Force S54, Z-Force SZ54, Z-Force Pro 54, RZT-54, and later Ultima 54-inch deck paths that may use different clutch, belt, blade, or spindle numbers.
The 01005012P PTO belt transfers power from the electric PTO clutch to the mower deck. The 02000653 deck belt drives the three spindle pulleys on the deck. These two belts perform different jobs and are not interchangeable.
Before Ordering
- Confirm your mower is a Cub Cadet Z-Force 54.
- Confirm the complete model number is 17BF3AGX010.
- Use the 759-05064 PTO clutch for the 01008434P clutch path.
- Use OEM number 01005012P for the engine-to-deck PTO belt. Contact PTO Direct USA to inquire about this product.
- Use the 02000653 deck belt for the spindle-drive belt path.
- Use the 02005018 / 942-04416 mower blades for the blade path. Three blades are required.
- Use the 918-04426 / 918-3129B spindle assembly for the spindle path.
- Do not order using the Z-Force 54 model name alone if your complete model number is different.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the PTO belt does not begin turning
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- PTO belt slips or squeals between the clutch and mower deck
- Deck belt jumps off or stops driving one or more spindle pulleys
- Rough spindle bearings, excessive deck vibration, or uneven cut quality
- Burning smell near the clutch or mower deck
FAQ
What PTO clutch fits a Cub Cadet Z-Force 54?
Cub Cadet Z-Force 54 model 17BF3AGX010 uses the 01008434P PTO clutch path. The current service replacement is the 759-05064 PTO clutch.
What does the 759-05064 PTO clutch replace?
The 759-05064 PTO clutch replaces Cub Cadet and MTD part numbers 01008434 and 01008434P on compatible mower applications.
What PTO belt fits the Cub Cadet Z-Force 54?
This Z-Force 54 path uses 01005012P as the engine-to-deck PTO belt. The diagram shows 01005012, which is currently serviced as 01005012P. It also replaces the earlier 01004315 belt path. Contact PTO Direct USA to inquire about this product.
What deck belt fits the Cub Cadet Z-Force 54 54-inch deck?
This confirmed 54-inch fabricated-deck path uses the 02000653 deck belt. The belt is approximately 90.9 to 91 inches long and 1/2 inch wide.
Is 02000653 the same belt as 01005012P?
No. The 01005012P PTO belt transfers power from the engine clutch to the mower deck. The 02000653 deck belt routes around and drives the spindle pulleys on the mower deck.
What blades fit the Cub Cadet Z-Force 54?
This 54-inch deck path uses three 02005018 / 942-04416 high-lift mower blades. The replacement listing also covers the 01005337 and 01005337P blade-number path.
What spindle fits the Cub Cadet Z-Force 54?
This Z-Force 54 fabricated-deck path uses the 918-04426 / 918-3129B spindle assembly. Three spindle assemblies are used on the deck.
Is there a full deck kit for the Cub Cadet Z-Force 54?
Not currently for this exact 01005012P / 02000653 / 942-04416 / 918-04426 Z-Force 54 deck path. Use the individual clutch, deck belt, blade, and spindle links above, and contact PTO Direct USA to inquire about the PTO belt.
Do the 2011, 2012, and 2013 Z-Force 54 models use the same parts path?
The confirmed Cub Cadet quick-reference records for model 17BF3AGX010 show the same core PTO clutch and deck-maintenance path across the 2011-and-before, 2012, and 2013 diagram families.
Is this the same as the Cub Cadet Z-Force S54?
No. The lap-bar Z-Force 54 and steering-wheel Z-Force S54 use different PTO clutch and belt paths. The Z-Force S54 uses the 917-04754A clutch family and should be checked through its separate model guide.
Is this the same as the Z-Force Pro 54 or Z-Force SZ54?
No. The Z-Force Pro and Z-Force SZ commercial mower families should be checked through their own model-specific parts diagrams. Do not assume that every mower carrying the Z-Force 54 name uses the same deck-part combination.
Need help confirming fitment? Email PTO Direct USA with your complete mower model number, mower year, and deck size before ordering.