UC14592 / GX20053 Steering Gear Set for John Deere D & E Series
$42.95
Skip to product information
UC14592 / GX20053 Steering Gear Set for John Deere D & E Series
$42.95
Aftermarket replacement steering sector and pinion gear set for select John Deere D & E Series. Match the original part number and supplied configuration shown below.
What’s included
- 1 × steering sector gear — UC14592
- 1 × steering pinion gear — GX20053
Component replacement numbers
steering sector gear: UC14592, UC13515, GX26057
steering pinion gear: GX20053, GX26220
Measurements & specifications
| UC14592 Plate width shown | 241 mm |
|---|---|
| UC14592 Plate height shown | 142 mm |
| UC14592 Plate thickness | 6 mm |
| GX20053 Outer gear teeth | 11 |
| GX20053 Outside diameter | 34 mm |
| GX20053 Inside diameter | 16.7 mm |
| GX20053 Height | 27 mm |
Measurements describe the replacement shown in the diagrams. Match the indicated measurement points on your original part.
Check mower & equipment fitmentView model examples, serial restrictions and application notes
Use the original part number with the full equipment model and serial number. Mower names can cover different steering and axle configurations.
John Deere
- D105, D110, D125, D130, D140, D160, D170 — later steering configurations using UC14592 / UC13515 / GX26057
- E100, E110, E120, E130, E140, E150, E160, E170, E180 — original sector and pinion numbers must both match
- S240 and X-series applications require the serial-specific sector number
Use this later-sector configuration when the original number is UC14592, UC13515 or GX26057. Earlier GX21924 / GX25785 sectors remain a separate listing.
Individual replacement parts
Match the part number, left/right position where applicable, mounting points, shaft or bore size and supplied design before ordering. Fitment support before and after purchase.