Toro 130-1848 PTO Clutch for GrandStand | Replaces 116-4172, Warner 5218-334

Overview

This HD Switch BIGBearing HiTorque electric PTO clutch is an upgraded aftermarket replacement for select Toro GrandStand commercial mowers using clutch part number 130-1848.

The replacement path also includes Toro and Exmark 116-4172, Warner 5218-300, and Warner 5218-334. Warner identifies 5218-334 as the replacement for the earlier 5218-300 clutch.

Match the original clutch number before ordering. Toro GrandStand mowers can use different clutch paths depending on the model and production configuration.

Heavy-Duty PTO Clutch Features

• Premium BIGBearing aftermarket clutch design
• HiTorque replacement for demanding commercial mowing applications
• Electric PTO clutch with integrated blade brake
• Replacement path for the Warner Commercial MagStop clutch family
• Designed for compatible Toro GrandStand stand-on mowers

Replaces Part Numbers

• Toro 130-1848
• Toro 1301848
• Toro 116-4172
• Toro 1164172
• Exmark 130-1848
• Exmark 116-4172
• Warner 5218-300
• Warner 5218300
• Warner 5218-334
• Warner 5218334

Compatible Toro GrandStand Model Paths

These are seller-listed model paths. Confirm the complete Toro model and serial number and verify that the original clutch or official parts diagram calls for 130-1848, 116-4172, 5218-300, or 5218-334 before purchasing.

Important Fitment Check

• Match the original clutch number to 130-1848, 116-4172, 5218-300, or 5218-334
• Confirm the complete Toro GrandStand model and serial number
• Compare the crankshaft bore and pulley diameter with the original clutch
• Compare the belt profile and pulley position
• Confirm the wire connection and lead position
• Compare the anti-rotation hardware and overall clutch height
• Do not install or test-mount the clutch until fitment is confirmed

Common Symptoms of a Failing PTO Clutch

• Mower blades will not engage
• Clutch clicks but does not begin turning the deck belt
• Blades engage when cold but stop after warming up
• Clutch slips under heavy mowing load
• Grinding, rattling, or bearing noise near the clutch
• Damaged wiring or intermittent electrical connection
• Burning smell or excessive heat around the clutch

FAQ

What PTO clutch replaces Toro 130-1848?

This HD Switch BIGBearing HiTorque clutch is an aftermarket replacement for Toro 130-1848 on compatible GrandStand mower applications.

Does this clutch replace Toro 116-4172?

Yes. Toro and Exmark 116-4172 is included in the 130-1848 replacement clutch path.

What Warner clutch replaces 5218-300?

Warner identifies 5218-334 as the replacement for the earlier Warner 5218-300 clutch.

Does this clutch fit Toro GrandStand model 74583?

The seller lists model 74583 as an application. Confirm that the mower's original clutch or official parts diagram calls for 130-1848, 116-4172, 5218-300, or 5218-334.

Does this clutch fit Toro GrandStand model 74588?

The seller lists model 74588 as an application for this clutch path. Verify the mower serial number and original clutch number before ordering.

Does this clutch fit Toro GrandStand model 74589?

The seller lists model 74589 as an application for this clutch path. Confirm the exact clutch through the model and serial-specific Toro parts diagram.

Is this a genuine Toro or Warner clutch?

No. This is an aftermarket HD Switch BIGBearing HiTorque replacement. It is not presented as a genuine Toro, Exmark, or Warner OEM clutch.

Does this clutch fit every Toro GrandStand?

No. Toro used multiple clutch configurations across the GrandStand family. Match the exact OEM clutch number from the model-specific parts diagram before ordering.

Need Help Confirming Fitment?

Use the PTO Clutch Fitment Help page before ordering. It explains which part numbers, mower details, measurements, and photos are needed to confirm the correct clutch path.