Quick Answer
The Cub Cadet Z-Force 44 44-inch zero-turn mower uses the 759-05064 electric PTO clutch replacement path for OEM clutch 01008434P when matched to the model number shown below. The matching 44-inch deck path uses the 02005685P PTO belt, 02000103P deck belt, 02005020 / 02005020-0637 mower blades, and 918-04426 spindle assemblies.
This guide is for the confirmed 2008 Cub Cadet Z-Force 44 model 17AF3AGL010 deck path shown below.
Cub Cadet Z-Force 44 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Year Path | Deck Size | OEM PTO Clutch | Service Replacement | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|---|
| Cub Cadet Z-Force 44 | 17AF3AGL010 | 2008 parts-reference path | 44-inch deck | 01008434P | 759-05064 | 759-05064 PTO Clutch | Confirmed PTO clutch path for this specific Z-Force 44 model-number and diagram family. |
Cub Cadet Z-Force 44 44-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| PTO Belt | 1 | 02005685 / 02005685P | Contact to inquire about product | The diagram shows 02005685, which is serviced by 02005685P. |
| Deck Belt | 1 | 02000103 / 02000103P | 02000103P Deck Belt | The diagram shows 02000103, which is serviced by 02000103P for this 44-inch deck path. |
| Blade | 3 | 02005020 / 02005020-0637 | 02005020 mower blades | Uses three matching high-lift blades on this 44-inch Z-Force deck path. |
| Spindle Housing Assembly | 3 | 918-04426 | 918-04426 / 918-3129B Spindle Assembly | Uses three spindle housing assemblies for this three-blade 44-inch deck. |
Model Path Note
This Z-Force 44 guide is specifically for model 17AF3AGL010 and uses the 759-05064 PTO clutch, 02005685P PTO belt, 02000103P deck belt, 02005020-0637 blades, and 918-04426 spindle assemblies. Keep this path separate from older Z-Force 44 model families such as 53AA5A6L710, which may show a different deck-belt path including 954-3039. Do not order a belt using the Z-Force 44 model name alone.
Before Ordering
- Confirm your mower is a Cub Cadet Z-Force 44.
- Confirm the complete model number is 17AF3AGL010.
- Use the 759-05064 PTO clutch for the 01008434P clutch path.
- Use OEM number 02005685P for the PTO belt path. Contact PTO Direct USA to inquire about this product.
- Use OEM number 02000103P for the deck belt path.
- Use OEM number 02005020-0637 for the blade path. Three blades are required.
- Use the 918-04426 / 918-3129B spindle assembly for the spindle path.
- Do not substitute the 954-3039 belt unless your complete model number and official diagram specifically show that older belt path.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the PTO belt does not begin turning
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- PTO belt or deck belt slips, squeals, or jumps off the pulley path
- Rough spindle bearings, vibration, or uneven cut quality
- Burning smell near the clutch or mower deck
FAQ
What PTO clutch fits a Cub Cadet Z-Force 44?
Cub Cadet Z-Force 44 model 17AF3AGL010 uses the 01008434P PTO clutch path. The current service replacement is the 759-05064 PTO clutch.
What does the 759-05064 PTO clutch replace?
The 759-05064 PTO clutch replaces Cub Cadet and MTD part numbers 01008434 and 01008434P on compatible applications using the same clutch specifications.
What PTO belt fits the Cub Cadet Z-Force 44?
This confirmed Z-Force 44 model 17AF3AGL010 path uses 02005685P. The original parts-reference path shows 02005685, which is replaced by 02005685P. Contact PTO Direct USA to inquire about this product.
What deck belt fits the Cub Cadet Z-Force 44 44-inch deck?
This confirmed 44-inch deck path uses 02000103P. The original diagram path shows 02000103, which is replaced by 02000103P.
What blades fit the Cub Cadet Z-Force 44?
This 44-inch deck path uses three 02005020-0637 high-lift blades. The original parts-reference number is 02005020.
What spindle fits the Cub Cadet Z-Force 44?
This Z-Force 44 44-inch deck path uses the 918-04426 / 918-3129B spindle assembly. Three spindle assemblies are used on the deck.
Is there a full deck kit for the Cub Cadet Z-Force 44?
Not currently for this exact 02005685P / 02000103P / 02005020-0637 / 918-04426 Z-Force 44 deck path. Use the individual clutch and spindle links above, and contact PTO Direct USA to inquire about the belt and blade products.
Do all Cub Cadet Z-Force 44 mowers use the same deck belt?
No. This guide is specifically for model 17AF3AGL010, which uses the 02000103P deck-belt path. Older Z-Force 44 models such as 53AA5A6L710 may show 954-3039 instead. Confirm the complete model number before ordering.
Is this guide for Cub Cadet Z-Force 44 model 17AE3AGF010?
No. Model 17AE3AGF010 belongs to a later fabricated-deck production path and should be checked through its own official parts diagram. This guide only confirms model 17AF3AGL010.
Need help confirming fitment? Email PTO Direct USA with your complete mower model number and deck size before ordering.