Quick Answer
The John Deere Z225 uses the AM136787 electric PTO clutch on the confirmed replacement path covered by this guide.
Shop the AM136787 PTO Clutch Replacement
The Z225 uses a 42-inch mower deck with the following common service parts:
- PTO Clutch: AM136787
- Deck Belt: M154294
- Mower Blades: GX22151 replacement path
- Spindle: AM137483 replacement path
Match the original PTO clutch number before ordering. Similar John Deere EZtrak models can use different clutch paths.
John Deere Z225 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model | Deck | OEM PTO Clutch | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| John Deere Z225 | 42-inch mower deck | AM136787 | AM136787 PTO Clutch | Confirmed Z225 clutch path. Match the original clutch number before ordering. |
John Deere Z225 42-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck-parts table.
| Component | Quantity | OEM Part Number | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| Mower Deck Belt | 1 | M154294 | M154294 Deck Belt | Confirmed mower-deck belt path for the Z225 42-inch deck. |
| Mower Blade | 2 | GX22151 | GX22151 Replacement Mower Blades | Aftermarket replacement blade path for the Z225 42-inch deck. |
| Spindle Assembly | 2 | AM137483 | AM136733 / AM137483 Spindle Assembly | Replacement spindle path used on compatible Z225 42-inch deck applications. |
Model Path Note
The John Deere Z225 uses the AM136787 PTO clutch path covered by this guide.
The mower-deck path is straightforward:
Do not use clutch fitment from a Z425, Z445, or another EZtrak model as a substitute for the Z225 part-number path.
42-Inch Mower Deck Path
The John Deere Z225 42-inch mower deck uses the M154294 mower-deck belt.
- Deck Belt: M154294
- Mower Blades: GX22151 replacement path
- Spindle Assemblies: AM136733 / AM137483
Important Fitment Check
Match the original PTO clutch number before ordering. This guide covers the John Deere AM136787 clutch path used on the Z225.
Do not substitute a different John Deere EZtrak clutch based on mower appearance or deck size alone.
Before Ordering
- Confirm the mower is a John Deere Z225
- Match AM136787 for the PTO clutch path
- Use M154294 for the confirmed 42-inch mower-deck belt path
- Match the original blade or spindle number before ordering replacement deck parts
Common Symptoms
- Blades do not engage when the PTO switch is activated
- PTO clutch clicks but the mower deck does not begin turning
- Blades engage when cold and stop after the mower heats up
- Deck belt squeals, slips, burns, or repeatedly jumps off
- Grinding or rough noise from a spindle assembly
- Excessive deck vibration during blade engagement
- Uneven cutting or visible mowing streaks
FAQ
What PTO clutch fits a John Deere Z225?
The confirmed John Deere Z225 clutch path covered by this guide uses the AM136787 electric PTO clutch.
What deck belt fits a John Deere Z225?
The John Deere Z225 42-inch mower deck uses the M154294 mower-deck belt.
What blades fit the John Deere Z225 42-inch deck?
The confirmed blade reference is GX22151. PTO Direct USA carries an aftermarket replacement blade set for this part-number path.
What spindle fits the John Deere Z225?
The AM137483 spindle path is used on compatible Z225 mower-deck applications. PTO Direct USA carries the AM136733 / AM137483 replacement spindle assembly.
Does the John Deere Z225 use the same PTO clutch as the Z425 or Z445?
Do not assume so based on the EZtrak model family alone. Match the original PTO clutch number before ordering. This guide covers the AM136787 clutch path.
Can I order Z225 deck parts using only the mower model?
The Z225 deck path in this guide is for the 42-inch mower deck. Match the original belt, blade, or spindle number when possible before ordering replacement deck parts.