Quick Answer
The John Deere X380 uses the AM144169 high-torque electric PTO clutch.
View the AM144169 / Warner 5219-156 PTO Clutch on eBay
As an eBay Partner, PTO Direct USA may earn a commission if you purchase through this link.
Important: The X380 uses the AM144169 clutch path. Do not order the earlier AM141536 clutch used on many older X300-Series tractors based on the X3 model family alone.
The mower-deck parts depend on which Accel Deep deck is installed:
- 48-inch Accel Deep 48A deck: M169500 deck belt and M145476 / UC22009 standard blades
- 54-inch Accel Deep 54A deck: M169485 primary belt, M169486 secondary belt, and UC22010 standard blades
Confirm whether the mower has the 48A or 54A deck before ordering deck parts.
John Deere X380 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model | Deck Options | OEM PTO Clutch | Product | Fitment Note |
|---|---|---|---|---|
| John Deere X380 | 48A or 54A Accel Deep | AM144169 |
View AM144169 / Warner 5219-156 on eBay
As an eBay Partner, PTO Direct USA may earn a commission if you purchase through this link. |
Confirmed X380 clutch path. Do not substitute the earlier AM141536 clutch based on the X300-Series name alone. |
John Deere X380 Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck-parts table.
| Deck Path | Component | Quantity | OEM Part Number | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|
| 48-inch Accel Deep 48A deck |
Mower Deck Belt | 1 | M169500 | M169500 Deck Belt | Confirmed mower-deck belt path for the X380 48A deck. |
| 48-inch Accel Deep 48A deck |
Standard Mower Blade | 3 | M145476 / UC22009 | M145476 / UC22009 Mower Blades | Standard three-blade path for the 48A Accel Deep deck. |
| 48-inch Accel Deep 48A deck |
Spindle Assembly | 3 | AM144608 | AM144608 Spindle Assembly | Accel Deep spindle path used on compatible X380 deck applications. Match the original spindle number before ordering. |
| 54-inch Accel Deep 54A deck |
Primary Engine-to-Deck Belt | 1 | M169485 | Contact to inquire about product | Primary belt for the 54A two-belt drive system. |
| 54-inch Accel Deep 54A deck |
Secondary Spindle-Drive Belt | 1 | M169486 | Contact to inquire about product | Secondary belt for the 54A deck. Do not substitute the M169500 48A belt. |
| 54-inch Accel Deep 54A deck |
Standard Mower Blade | 3 | M143520 / UC22010 | M143520 / UC22010 Mower Blades | Standard three-blade path for the 54A Accel Deep deck. |
| 54-inch Accel Deep 54A deck |
Spindle Assembly | 3 | AM144608 | AM144608 Spindle Assembly | Accel Deep spindle path used on compatible X380 deck applications. Match the original spindle number before ordering. |
Model Path Note
The John Deere X380 uses the AM144169 high-torque electric PTO clutch.
The main deck-parts split is between the 48A and 54A Accel Deep decks.
- 48A: M169500 mower-deck belt and UC22009 standard blades
- 54A: M169485 primary belt, M169486 secondary belt, and UC22010 standard blades
Do not choose the belt by tractor model alone. Confirm the installed deck before ordering.
48A Accel Deep Deck Path
The X380 48A Accel Deep deck uses the M169500 mower-deck belt.
- Deck Belt: M169500
- Standard Blades: M145476 / UC22009
- Spindle Assemblies: AM144608
Do not substitute the M169486 54A secondary belt for the 48A belt path.
54A Accel Deep Deck Path
The X380 54A Accel Deep deck uses a two-belt drive system:
- Primary Belt: M169485
- Secondary Belt: M169486
The standard blade path uses three M143520 / UC22010 mower blades.
The deck also uses the AM144608 spindle assembly on compatible X380 applications.
Important Fitment Check
Match the original PTO clutch number before ordering. The John Deere X380 uses the AM144169 clutch path.
Do not substitute the earlier AM141536 clutch based on the X300-Series name alone.
Before Ordering
- Confirm the tractor is a John Deere X380
- Use AM144169 for the confirmed X380 PTO clutch path
- Confirm whether the installed deck is a 48A or 54A
- Use M169500 for the confirmed X380 48A belt path
- Use M169485 and M169486 for the 54A two-belt path
- Match the original belt, blade, or spindle number before ordering replacement deck parts
Common Symptoms
- Blades do not engage when the PTO switch is activated
- PTO clutch clicks but the mower deck does not begin turning
- Blades engage when cold and stop after the mower heats up
- Deck belt squeals, slips, burns, or repeatedly jumps off
- Primary belt turns but the secondary belt or blades do not on the 54A deck
- Grinding or rough noise from a spindle assembly
- Excessive deck vibration during blade engagement
- Uneven cutting or visible mowing streaks
FAQ
What PTO clutch fits a John Deere X380?
The confirmed John Deere X380 clutch path uses the AM144169 high-torque electric PTO clutch.
Does AM141536 fit the John Deere X380?
Do not use AM141536 as the normal X380 replacement path. The X380 uses AM144169.
What mower decks are covered in this X380 guide?
This guide covers the 48A Accel Deep and 54A Accel Deep deck paths.
What belt fits the John Deere X380 48A deck?
The confirmed X380 48A deck path uses the M169500 mower-deck belt.
What belts fit the John Deere X380 54A deck?
The 54A deck uses M169485 as the primary belt and M169486 as the secondary belt.
Are M169500 and M169486 the same belt?
No. M169500 is used on the X380 48A deck path. M169486 is the secondary belt for the 54A deck.
What blades fit the John Deere X380 48A deck?
The standard 48A blade path uses three M145476 / UC22009 mower blades.
What blades fit the John Deere X380 54A deck?
The standard 54A blade path uses three M143520 / UC22010 mower blades.
What spindle fits the John Deere X380?
The AM144608 spindle assembly is used on compatible John Deere X380 Accel Deep deck applications. Match the original spindle number before ordering.
Can I order John Deere X380 deck parts using only the tractor model?
No. Confirm whether the mower has the 48A or 54A deck before ordering belts or blades.