Quick Answer
The gasoline-powered Cub Cadet Ultima ZT2 50 50-inch zero-turn mower uses the 917-05209 electric PTO clutch and 954-05078 deck drive belt when matched to the model and production paths shown below.
The blade and spindle system changed during production. The original deck path uses 942-05052A six-point-star blades with 918-06980 spindle assemblies.
The later shaped-center deck path uses 742P05094 high-lift blades for stronger deck airflow or 742P05094-L low-lift blades for dry, dusty, or sandy mowing conditions. Both later blade styles use the 618P09256 spindle path.
This guide separates the original six-point-star blade system from the later shaped-center blade and spindle system.
Cub Cadet ZT2 50 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Production Path | Deck Size | OEM PTO Clutch | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|
| Cub Cadet Ultima ZT2 50 | 17RIEACO010 | Original 2019 parts-supplement family | 50-inch AeroForce fabricated deck | 917-05209 | 917-05209 PTO Clutch | Original ZT2 50 path using six-point-star 942-05052A blades and 918-06980 spindle assemblies. |
| Cub Cadet Ultima ZT2 50 | 17AIEAC2010 17RIEAC2010 |
2020–2021 S-blade service family | 50-inch AeroForce fabricated deck | 917-05209 | 917-05209 PTO Clutch | Later model family using the 742P05094 blade options and 618P09256 spindle service path. |
| Cub Cadet Ultima ZT2 50 | 17AIEAC2A10 | Current 2024 parts-supplement family | 50-inch AeroForce fabricated deck | 917-05209 | 917-05209 PTO Clutch | Current gasoline-powered ZT2 50 path using the later shaped-center blade and spindle system. |
Cub Cadet ZT2 50 50-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Production Path | Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|
| All confirmed ZT2 50 paths | Deck Drive Belt | 1 | 754-05078 / 954-05078 / 490-501-C070 | Contact to inquire about product | This approximately 143.5-inch belt transfers power from the electric PTO clutch through the 50-inch mower-deck pulley system. |
| Original six-point-star path | Standard Blade | 3 | 742-05052A / 942-05052A | 742-05052A / 942-05052A Mower Blades | Uses three approximately 17.25-inch blades with six-point-star center holes. |
| Original six-point-star path | Spindle Assembly | 3 | 618-06980 / 918-06980 | 618-06980 / 918-06980 Spindle Assembly | Uses three spindle assemblies designed for the original six-point-star blade system. |
| Later shaped-center path | High-Lift Blade | 3 | 742-05094 / 742P05094 / 490-110-C193 / 490-110-Y193 / CMXGZAM110193 | 742P05094 High-Lift Mower Blades | Standard later-production blade path for stronger deck airflow, side discharge, and bagging. |
| Later shaped-center path | Low-Lift Blade Option | 3 | 742-05094-L / 742P05094-L / 490-110-C200 / 490-110-Y200 / CMXGZAM110200 | 742P05094-L Low-Lift Mower Blades | Optional low-lift sand-blade path for dry, dusty, or sandy mowing conditions where reduced airflow is preferred. |
| Later shaped-center path | Spindle Assembly | 3 | 618-09256 / 618P09256 | Contact to inquire about product | Later spindle assembly for the shaped-center blade system. Do not substitute the earlier 918-06980 spindle. |
Model Path Note
The confirmed Cub Cadet ZT2 50 model families use the 917-05209 PTO clutch and 954-05078 deck drive belt. The important production change is the blade-center and spindle-shaft system.
The original 2019 path uses 942-05052A six-point-star blades with 918-06980 spindles. The later path uses 742P05094 high-lift blades or 742P05094-L low-lift blades with 618P09256 spindles.
The six-point-star blades and later shaped-center blades are not interchangeable. Match the original blade center and spindle-shaft pattern before ordering blades or spindle assemblies.
Cub Cadet describes the later OEM blade opening as S-shaped. Some aftermarket distributors describe compatible replacement openings as diamond-shaped. Use the original part number and compare the actual center opening before installation.
Choose the Correct Later Blade Style
742P05094 High Lift
The 742P05094 high-lift blade set creates stronger deck airflow for side discharge, grass collection, and bagging.
742P05094-L Low Lift
The 742P05094-L low-lift blade set produces less deck airflow. Low-lift sand blades are commonly used in dry, dusty, or sandy conditions where reduced dust movement and reduced circulation of abrasive material are preferred.
High-lift and low-lift blades use the later blade-number family but provide different mowing performance. Choose the style that matches the original blade or your mowing conditions.
Before Ordering
- Confirm your mower is a gasoline-powered Cub Cadet Ultima ZT2 50.
- Confirm the complete mower model number is listed in the PTO clutch table above.
- Use the 917-05209 PTO clutch for the confirmed clutch path.
- Use OEM number 954-05078 or packaged part number 490-501-C070 for the deck drive belt. Contact PTO Direct USA to inquire about this product.
- Inspect the original blade-center pattern before ordering blades or spindle assemblies.
- Use 942-05052A mower blades with 918-06980 spindles on the original six-point-star path.
- Use 742P05094 high-lift blades or 742P05094-L low-lift blades with 618P09256 spindles on the later shaped-center path.
- Do not install a later shaped-center blade on a six-point-star spindle shaft.
- Do not install a six-point-star blade on a 618P09256 spindle shaft.
- Do not order blades or spindle assemblies using the ZT2 50 model name or 50-inch deck size alone.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the deck belt does not begin turning
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- Deck belt slips, squeals, or jumps off the pulley path
- Blade does not seat correctly against the spindle shaft
- Replacement blade center does not match the spindle-shaft pattern
- Rough spindle bearings, excessive deck vibration, or uneven cut quality
- Burning smell near the PTO clutch or deck belt
FAQ
What PTO clutch fits a Cub Cadet ZT2 50?
The confirmed gasoline-powered Cub Cadet Ultima ZT2 50 model families listed in this guide use the 917-05209 PTO clutch.
What does the 917-05209 PTO clutch replace?
The 917-05209 PTO clutch replaces the 717-05209 and 917-05209 clutch path on compatible Cub Cadet and MTD mower applications. It also cross-references Warner 5219-177.
What deck belt fits the Cub Cadet ZT2 50?
The confirmed Cub Cadet ZT2 50 deck path uses 954-05078. The replacement path also includes 754-05078 and packaged part number 490-501-C070. Contact PTO Direct USA to inquire about this product.
How long is the Cub Cadet ZT2 50 deck belt?
The 954-05078 deck belt is approximately 143.5 inches long and 0.656 inch wide.
Does the Cub Cadet ZT2 50 use separate PTO and deck belts?
The mower-deck path uses one long 954-05078 deck drive belt that transfers power from the electric PTO clutch through the mower-deck pulley system. The mower also uses a separate 954-04317A hydrostatic transmission belt, which should not be confused with the deck belt.
What blades fit the original Cub Cadet ZT2 50?
Original model 17RIEACO010 uses three 742-05052A / 942-05052A mower blades. These blades use six-point-star center holes.
What spindle fits the original Cub Cadet ZT2 50?
The original six-point-star path uses the 618-06980 / 918-06980 spindle assembly. Three spindle assemblies are used on the 50-inch deck.
What high-lift blades fit the later Cub Cadet ZT2 50?
The later blade and spindle path uses three 742P05094 high-lift mower blades. The linked aftermarket blades measure approximately 17-1/4 inches long and use the compatible shaped-center mounting path.
What low-lift blades fit the later Cub Cadet ZT2 50?
The later deck path can also use three 742P05094-L low-lift mower blades. These are intended for dry, dusty, or sandy conditions where reduced deck airflow is preferred.
What is the difference between 742P05094 and 742P05094-L?
The 742P05094 is the high-lift blade path for stronger airflow, side discharge, and bagging. The 742P05094-L is the low-lift sand-blade path designed to reduce airflow and dust in dry or abrasive mowing conditions.
What spindle fits the later Cub Cadet ZT2 50?
The later shaped-center blade path uses 618P09256 spindle assemblies. Three spindle assemblies are required. Contact PTO Direct USA to inquire about this product.
Can I use 742P05094 blades with 918-06980 spindles?
No. The 742P05094 blade belongs to the later shaped-center blade system. The 918-06980 spindle belongs to the original six-point-star blade system.
Can I use 742P05094-L blades with 918-06980 spindles?
No. The 742P05094-L low-lift blade also belongs to the later shaped-center system and should not be installed on an original six-point-star 918-06980 spindle.
Can I replace a 618P09256 spindle with a 918-06980 spindle?
No. These spindle assemblies use different blade-shaft patterns. Use 918-06980 with the original six-point-star blades and 618P09256 with the later 742P05094 blade family.
How can I tell which Cub Cadet ZT2 50 blade path I have?
Inspect one original blade and identify its center-hole shape. The original path uses a six-point-star center. The later path uses a wider shaped center described as S-shaped by Cub Cadet and diamond-shaped by some aftermarket suppliers. Also compare the complete mower model number and original blade or spindle number.
Do all Cub Cadet ZT2 50 mowers use the same deck belt?
The confirmed original and later ZT2 50 paths listed in this guide use the same 954-05078 deck drive belt. The primary production change affects the blades and spindle assemblies rather than the deck-belt number.
Is there a full deck kit for the Cub Cadet ZT2 50?
Not currently for both confirmed production paths. Use the individual clutch, blade, and original spindle links above, and contact PTO Direct USA to inquire about the 954-05078 belt or 618P09256 spindle assemblies.