Quick Answer
The Cub Cadet Z-Force S54 54-inch steering-wheel zero-turn mower uses the 917-04754A electric PTO clutch path when matched to the model number shown below. The matching 54-inch deck path uses the 954-04262 PTO belt, 954-04137B deck belt, 942-04416 blades, and 918-04426 spindle assemblies.
This guide is for the confirmed Cub Cadet Z-Force S54 54-inch deck path shown below.
Cub Cadet Z-Force S54 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Year Path | Deck Size | OEM PTO Clutch | Service Replacement | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|---|
| Cub Cadet Z-Force S54 | 17AI5GHC010 | 2013 | 54-inch deck | 917-04754A | 917-04754A | 917-04754A PTO Clutch | Confirmed PTO clutch path for this Z-Force S54 model number. |
Cub Cadet Z-Force S54 54-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| PTO Belt | 1 | 954-04262 | Contact to inquire about product | This is the belt path shown for the PTO belt on this Z-Force S54 quick-reference diagram. |
| Deck Belt | 1 | 754-04137A / 754-04137B / 954-04137A / 954-04137B | 954-04137B Deck Belt | Diagram path shows 954-04137A, which supersedes to 954-04137B. |
| Blade | 3 | 01005337 / 01005337P / 02005018 / 1005337 / 742-04416 / 942-04416 | 01005337 / 942-04416 Mower Blades | Uses three matching blades on this 54-inch Z-Force S54 deck path. |
| Spindle Assembly | 3 | 918-3129C / 918-04426 | 918-04426 / 918-3129B Spindle Assembly | Diagram path shows 918-3129C, which routes to the 918-04426 spindle housing assembly path. |
Model Path Note
This Z-Force S54 guide uses the 917-04754A PTO clutch, 954-04262 PTO belt, 954-04137B deck belt, 942-04416 blades, and 918-04426 spindle assemblies. Keep this path separate from RZT 54-inch and Enduro XT 54-inch mower paths that may use different blades, spindles, belts, or PTO clutch numbers.
Before Ordering
- Confirm your mower is a Cub Cadet Z-Force S54.
- Confirm your model number is listed in the PTO clutch table above.
- Use the 917-04754A PTO clutch for the PTO clutch path.
- Use OEM number 954-04262 for the PTO belt path. Contact PTO Direct USA to inquire about this product.
- Use the 954-04137B deck belt for the deck belt path.
- Use the 01005337 / 942-04416 mower blades for the blade path.
- Use the 918-04426 / 918-3129B spindle assembly for the spindle path.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the deck belt does not spin
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- PTO belt or deck belt slips, squeals, or jumps off the pulley path
- Rough spindle bearings, vibration, or uneven cut quality
- Burning smell near the clutch or deck belt area
FAQ
What PTO clutch fits a Cub Cadet Z-Force S54?
The Cub Cadet Z-Force S54 model number listed in this guide uses the 917-04754A PTO clutch path.
What does the 917-04754A PTO clutch replace?
The 917-04754A PTO clutch replaces the 717-04754 / 717-04754A and 917-04754 / 917-04754A clutch path on compatible Cub Cadet Z-Force S applications.
What PTO belt fits the Cub Cadet Z-Force S54?
This Z-Force S54 quick-reference path shows 954-04262 as the PTO belt. PTO Direct USA should add a 954-04262 product page before linking this belt from the guide.
What deck belt fits the Cub Cadet Z-Force S54 54-inch deck?
This Z-Force S54 54-inch deck path uses the 954-04137B deck belt. The diagram path shows 954-04137A, which supersedes to 954-04137B.
What blades fit the Cub Cadet Z-Force S54?
This 54-inch deck path uses three 01005337 / 942-04416 mower blades.
What spindle fits the Cub Cadet Z-Force S54?
This Z-Force S54 54-inch deck path uses the 918-04426 / 918-3129B spindle assembly path. The diagram path shows 918-3129C, which routes to the 918-04426 spindle housing assembly path.
Is there a full deck kit for the Cub Cadet Z-Force S54?
Not currently for this exact 954-04262 / 954-04137B / 942-04416 / 918-04426 Z-Force S54 deck path. Use the individual clutch, belt, blade, and spindle links above.
Is this the same as the RZT-S54 or XT1-GT54 deck path?
No. The Z-Force S54 uses a different 54-inch deck parts path than many RZT and Enduro XT 54-inch models. Use this guide only for the Z-Force S54 model number shown above.
Need help confirming fitment? Email PTO Direct USA with your mower model number and deck size before ordering.