Quick Answer
The Cub Cadet Z-Force S48 48-inch steering-wheel zero-turn mower uses the 917-04552A electric PTO clutch replacement path when matched to the model numbers shown below. The matching 48-inch deck path uses the 954-04044A PTO/deck belt, 02005017 / 942-04417 blades, and 918-04426 spindle assemblies.
This guide is for the confirmed Cub Cadet Z-Force S48 48-inch deck path shown below.
Cub Cadet Z-Force S48 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Year Path | Deck Size | OEM PTO Clutch | Service Replacement Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|---|
| Cub Cadet Z-Force S48 | 17AI5BHB010 17AI5BHB210 53BH5FJB050 |
2012–2013 model family | 48-inch deck | 917-04552 | 917-04552 / 917-04552A | 917-04552A PTO Clutch | Confirmed PTO clutch path for this Z-Force S48 diagram family. |
Cub Cadet Z-Force S48 48-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| PTO/Deck Belt | 1 | 754-04044 / 754-04044A / 954-04044 / 954-04044A | 954-04044A PTO/Deck Belt | Confirmed PTO/deck belt path for this Z-Force S48 48-inch deck configuration. |
| Blade | 3 | 01005336 / 01005336P / 02005017 / 020005017 / 742-04417 / 942-04417 | 02005017 / 942-04417 Mower Blades | Uses three matching blades on this 48-inch Z-Force S48 deck path. |
| Spindle Assembly | 3 | 918-04426 | 918-04426 / 918-3129B Spindle Assembly | Uses three spindle assemblies for this 48-inch deck path. |
Model Path Note
This Z-Force S48 guide uses the 917-04552 / 917-04552A PTO clutch, 954-04044A PTO/deck belt, 942-04417 blades, and 918-04426 spindle assemblies. Keep this path separate from the Z-Force S54 and Z-Force S60 guides, which use different deck belt and blade paths.
Before Ordering
- Confirm your mower is a Cub Cadet Z-Force S48.
- Confirm your model number is listed in the PTO clutch table above.
- Use the 917-04552A PTO clutch for the PTO clutch path.
- Use the 954-04044A PTO/deck belt for the belt path.
- Use the 02005017 / 942-04417 mower blades for the blade path.
- Use the 918-04426 / 918-3129B spindle assembly for the spindle path.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the deck belt does not spin
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- PTO/deck belt slips, squeals, or jumps off the pulley path
- Rough spindle bearings, vibration, or uneven cut quality
- Burning smell near the clutch or deck belt area
FAQ
What PTO clutch fits a Cub Cadet Z-Force S48?
The Cub Cadet Z-Force S48 model numbers listed in this guide use the 917-04552A PTO clutch replacement path. The model diagram shows 917-04552 for this PTO clutch path.
Is 917-04552 the same replacement family as 917-04552A?
Yes. For this Z-Force S48 path, the 917-04552 and 917-04552A numbers are part of the same PTO clutch replacement family. This clutch path also commonly cross-references Warner 5219-98.
What PTO/deck belt fits the Cub Cadet Z-Force S48?
This Z-Force S48 48-inch deck path uses the 954-04044A PTO/deck belt. This belt also follows the 754-04044, 754-04044A, and 954-04044 belt number path.
What blades fit the Cub Cadet Z-Force S48?
This 48-inch deck path uses three 02005017 / 942-04417 mower blades. Depending on the model path, diagrams may show 01005336, 02005017, or 020005017, which route to the same 48-inch Z-Force S48 blade replacement path.
What spindle fits the Cub Cadet Z-Force S48?
This Z-Force S48 48-inch deck path uses the 918-04426 / 918-3129B spindle assembly. Three spindle assemblies are used on the deck.
Is there a full deck kit for the Cub Cadet Z-Force S48?
Not currently for this exact 954-04044A / 942-04417 / 918-04426 Z-Force S48 deck path. Use the individual clutch, belt, blade, and spindle links above.
Is this the same as the Z-Force S54 deck path?
No. The Z-Force S48 and Z-Force S54 both belong to the Z-Force S family, but the deck parts path is different. The S48 uses the 954-04044A belt and 942-04417 blade path, while the S54 uses a different 54-inch deck configuration.
Is this the same clutch as the RZT 50?
Many Cub Cadet RZT 50 and Z-Force S48 applications share the 917-04552 / 917-04552A PTO clutch family, but the deck parts path is not always the same. Use the model-specific guide for your mower.
Need help confirming fitment? Email PTO Direct USA with your mower model number and deck size before ordering.