Quick Answer
The Cub Cadet XT1-GT50 50-inch garden tractor uses the 917-05209 electric PTO clutch path when matched to the model numbers shown below. The matching 50-inch deck parts path uses the 954-04077A deck belt, 942-05052A blades, and 918-06980 spindle assemblies.
This guide is for the confirmed Cub Cadet XT1-GT50 50-inch deck path shown below.
Cub Cadet XT1-GT50 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Deck Size | OEM PTO Clutch | Service Replacement | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|
| Cub Cadet XT1-GT50 Cub Cadet XT1-GT50 KH | 14WQA3CQ010 14AQA3CQ056 14AQA3CQ010 | 50-inch deck | 917-05209 | 917-05209 | 917-05209 PTO Clutch | Confirmed PTO clutch path for this XT1-GT50 model number. |
Cub Cadet XT1-GT50 50-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| Deck Belt | 1 | 754-04077 / 754-04077A / 954-04077 / 954-04077A | 954-04077A Deck Belt | Confirmed 50-inch deck belt path for this XT1-GT50 deck configuration. |
| Blade | 3 | 742-05052A / 942-05052A | 942-05052A / 742-05052A Mower Blades | Uses three matching blades on this 50-inch deck path. |
| Spindle Assembly | 3 | 618-06980 / 918-06980 | 618-06980 / 918-06980 Spindle Assembly | Uses three spindle assemblies for this 50-inch deck path. |
Model Path Note
This XT1-GT50 guide uses the 917-05209 PTO clutch, 954-04077A belt, 942-05052A blades, and 918-06980 spindle assemblies. Keep this path separate from older 50-inch Cub Cadet lawn tractor paths that use 917-04174, 942-04053C blades, or different spindle assemblies.
Before Ordering
- Confirm your mower is a Cub Cadet XT1-GT50 or XT1-GT50 KH.
- Confirm your model number is listed in the PTO clutch table above.
- Use the 917-05209 PTO clutch for the PTO clutch path.
- Use the 954-04077A deck belt for the deck belt path.
- Use the 942-05052A / 742-05052A mower blades for the blade path.
- Use the 618-06980 / 918-06980 spindle assembly for the spindle path.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the deck belt does not spin
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- Deck belt slips, squeals, or jumps off the pulley path
- Rough spindle bearings, vibration, or uneven cut quality
- Burning smell near the clutch or deck belt area
FAQ
What PTO clutch fits a Cub Cadet XT1-GT50?
The Cub Cadet XT1-GT50 model numbers listed in this guide use the 917-05209 PTO clutch path.
What deck belt fits the Cub Cadet XT1-GT50 50-inch deck?
This XT1-GT50 50-inch deck path uses the 954-04077A deck belt. This belt also follows the 754-04077, 754-04077A, and 954-04077 belt number path.
What blades fit the Cub Cadet XT1-GT50?
This 50-inch deck path uses three 942-05052A / 742-05052A mower blades.
What spindle fits the Cub Cadet XT1-GT50?
This XT1-GT50 50-inch deck path uses the 618-06980 / 918-06980 spindle assembly. Three spindle assemblies are used on the deck.
Is there a full deck kit for the Cub Cadet XT1-GT50?
Not currently for this exact 954-04077A / 942-05052A / 918-06980 XT1-GT50 deck path. Use the individual clutch, belt, blade, and spindle links above.
Is this the same blade path as the LTX1050 or LT1050?
No. This XT1-GT50 guide uses the 942-05052A / 742-05052A blade path. Older LTX1050, LT1050, and related 50-inch deck paths commonly use 942-04053C blades, so keep those paths separate.
Is this the same spindle path as the XT1-LT50?
Not always. This XT1-GT50 guide uses the 918-06980 / 618-06980 spindle path. Some XT1-LT50 paths use a different spindle assembly, so use the model-specific guide for that mower.
Need help confirming fitment? Email PTO Direct USA with your mower model number and deck size before ordering.