Quick Answer
The Cub Cadet SLTX1050 50-inch lawn tractor uses the 917-04174 electric PTO clutch path when matched to the model numbers shown below. The matching 50-inch deck parts path depends on model number and year path.
For model number 13AQ92AP010, use the 954-04240 deck belt, 942-04053C blades, and 918-05016 spindle assemblies. For model number 13WQ92AP010, use the 954-04077A deck belt, 942-04053C blades, and 918-04125C spindle assemblies.
This guide is for the confirmed Cub Cadet SLTX1050 50-inch deck paths shown below.
Cub Cadet SLTX1050 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Deck Size | OEM PTO Clutch | Service Replacement | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|
| Cub Cadet SLTX1050 | 13AQ92AP010 13WQ92AP010 | 50-inch deck | 917-04174A | 917-04174 | 917-04174 PTO Clutch | Confirmed PTO clutch path for this SLTX1050 model number. |
Cub Cadet SLTX1050 50-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Model Path | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|
| Deck Belt | 13AQ92AP010 | 1 | 754-04240 / 954-04240 | 954-04240 Deck Belt | Confirmed 50-inch deck belt path for this SLTX1050 model path. |
| Deck Belt | 13WQ92AP010 | 1 | 754-04077 / 954-04077 / 954-04077A | 954-04077A Deck Belt | Confirmed 50-inch deck belt path for this SLTX1050 model path. |
| Blade | Both paths | 3 | 742-04053 / 742-04053A / 742-04053B / 742-04053C / 942-04053 / 942-04053A / 942-04053B / 942-04053C | 742-04053 / 942-04053C Mower Blades | Uses three matching blades on both SLTX1050 50-inch deck paths. |
| Spindle Assembly | 13AQ92AP010 | 3 | 618-04825 / 618-04825B / 618-05016 / 918-04825 / 918-04825B / 918-05016 | 618-05016 / 918-05016 Spindle Assembly | Uses three spindle assemblies for this SLTX1050 deck path. |
| Spindle Assembly | 13WQ92AP010 | 3 | 618-04125 / 918-04125 / 918-04125B / 918-04125C / 618-04126 / 918-04126B | 618-04125 / 918-04125 Spindle Assembly | Uses three spindle assemblies for this SLTX1050 deck path. |
Deck Path Split Note
The SLTX1050 keeps the same 917-04174 PTO clutch path, but the deck parts path changes by model number. Model 13AQ92AP010 uses the 954-04240 belt and 918-05016 spindle path. Model 13WQ92AP010 uses the 954-04077A belt and 918-04125C spindle path.
Before Ordering
- Confirm your mower is a Cub Cadet SLTX1050.
- Confirm your model number is listed in the PTO clutch table above.
- Use the 917-04174 PTO clutch for the PTO clutch path.
- For model 13AQ92AP010, use the 954-04240 deck belt and 618-05016 / 918-05016 spindle assembly.
- For model 13WQ92AP010, use the 954-04077A deck belt and 618-04125 / 918-04125 spindle assembly.
- Use the 742-04053 / 942-04053C mower blades for the blade path.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the deck belt does not spin
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- Deck belt slips, squeals, or jumps off the pulley path
- Rough spindle bearings, vibration, or uneven cut quality
- Burning smell near the clutch or deck belt area
FAQ
What PTO clutch fits a Cub Cadet SLTX1050?
The Cub Cadet SLTX1050 model numbers listed in this guide use the 917-04174 PTO clutch path. The model diagrams show 917-04174A for this PTO clutch path.
Is 917-04174A the same replacement path as 917-04174?
Yes. For this SLTX1050 path, use the 917-04174 PTO clutch replacement listing for the 917-04174A model-diagram path.
What deck belt fits the Cub Cadet SLTX1050?
It depends on model number. Model 13AQ92AP010 uses the 954-04240 deck belt. Model 13WQ92AP010 uses the 954-04077A deck belt.
What blades fit the Cub Cadet SLTX1050?
This 50-inch deck path uses three 742-04053 / 942-04053C mower blades.
What spindle fits the Cub Cadet SLTX1050?
It depends on model number. Model 13AQ92AP010 uses the 618-05016 / 918-05016 spindle assembly. Model 13WQ92AP010 uses the 618-04125 / 918-04125 spindle assembly path.
Is there a full deck kit for the Cub Cadet SLTX1050?
Not currently for these exact split SLTX1050 deck paths. Use the individual clutch, belt, blade, and spindle links above.
Is this the same deck parts path as the LTX1050?
Not always. The SLTX1050 uses the same 917-04174 PTO clutch path as many LTX1050 models, but the belt and spindle paths can split by model number. Use the SLTX1050 model number table above.
Need help confirming fitment? Email PTO Direct USA with your mower model number and deck size before ordering.