Quick Answer
The Cub Cadet LTX1050 50-inch lawn tractor uses the 917-04174 electric PTO clutch path when matched to the model numbers shown below. The matching 50-inch deck parts path uses the 954-04240 deck belt, 942-04053C blades, and 918-05016 spindle assemblies.
This guide is for the confirmed Cub Cadet LTX1050 50-inch deck path shown below.
Cub Cadet LTX1050 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Deck Size | OEM PTO Clutch | Service Replacement | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|
| Cub Cadet LTX1050 KH Cub Cadet LTX1050 KW Cub Cadet LTX1050 VT | 13AP91AP010 13WF91AP010 13AI93AP010 13VR91AP010 13VR91AP209 13WR91AP009 13WR91AP010 | 50-inch deck | 917-04174A | 917-04174 | 917-04174 PTO Clutch | Confirmed PTO clutch path for this LTX1050 model number. |
Cub Cadet LTX1050 50-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| Deck Belt | 1 | 754-04240 / 954-04240 | 954-04240 Deck Belt | Confirmed 50-inch PTO/deck belt path for this LTX1050 deck configuration. |
| Blade | 3 | 742-04053 / 742-04053A / 742-04053B / 742-04053C / 942-04053 / 942-04053A / 942-04053B / 942-04053C | 742-04053 / 942-04053C Mower Blades | Uses three matching blades on this 50-inch deck path. |
| Spindle Assembly | 3 | 618-04825 / 618-04825B / 618-05016 / 918-04825 / 918-04825B / 918-05016 | 618-05016 / 918-05016 Spindle Assembly | Uses three spindle assemblies for this 50-inch deck path. |
Deck Path Note
This LTX1050 guide uses the 954-04240 belt, 942-04053C blades, and 918-05016 spindle assemblies. Do not merge this deck path with the RZT 50 path that uses the 954-04044 belt and a different spindle setup.
Before Ordering
- Confirm your mower is a Cub Cadet LTX1050 KH, LTX1050 KW, or LTX1050 VT.
- Confirm your model number is listed in the PTO clutch table above.
- Use the 917-04174 PTO clutch for the PTO clutch path.
- Use the 954-04240 deck belt for the deck belt path.
- Use the 742-04053 / 942-04053C mower blades for the blade path.
- Use the 618-05016 / 918-05016 spindle assembly for the spindle path.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the deck belt does not spin
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- Deck belt slips, squeals, or jumps off the pulley path
- Rough spindle bearings, vibration, or uneven cut quality
- Burning smell near the clutch or deck belt area
FAQ
What PTO clutch fits a Cub Cadet LTX1050?
The Cub Cadet LTX1050 model numbers listed in this guide use the 917-04174 PTO clutch path. The model diagrams show 917-04174A for this PTO clutch path.
Is 917-04174A the same replacement path as 917-04174?
Yes. For this LTX1050 path, use the 917-04174 PTO clutch replacement listing for the 917-04174A model-diagram path.
What deck belt fits the Cub Cadet LTX1050 50-inch deck?
This LTX1050 50-inch deck path uses the 954-04240 deck belt. This belt also follows the 754-04240 belt number path.
What blades fit the Cub Cadet LTX1050?
This 50-inch deck path uses three 742-04053 / 942-04053C mower blades.
What spindle fits the Cub Cadet LTX1050?
This LTX1050 50-inch deck path uses the 618-05016 / 918-05016 spindle assembly. The model diagrams may show 918-04825 or 918-04825B, which route to the same replacement spindle path. Three spindle assemblies are used on the deck.
Is there a full deck kit for the Cub Cadet LTX1050?
Not currently for this exact 954-04240 / 942-04053C / 918-05016 LTX1050 deck path. Use the individual belt, blade, and spindle links above.
Is this the same deck parts path as the Cub Cadet RZT 50?
No. This LTX1050 guide uses the 954-04240 belt and 918-05016 spindle path. The RZT 50 guide uses a separate 954-04044 belt and different spindle path.
Need help confirming fitment? Email PTO Direct USA with your mower model number and deck size before ordering.