Quick Answer
The 2012 Cub Cadet LGT1050 and LGTX1050 50-inch lawn tractors use the 917-04174 electric PTO clutch path when matched to the model numbers shown below. The matching 50-inch deck parts path uses the 954-04077A deck belt, 942-04053C blades, and 918-04125C spindle assemblies.
This guide is for the confirmed 2012 Cub Cadet LGT1050 and LGTX1050 50-inch deck path shown below.
Cub Cadet LGT1050 and LGTX1050 PTO Clutch Table
Table tip: On mobile, swipe sideways to view the full fitment table.
| Model Name | Model Number | Year Path | Deck Size | OEM PTO Clutch | Service Replacement | PTO Direct Product | Fitment Note |
|---|---|---|---|---|---|---|---|
| Cub Cadet LGT1050 Cub Cadet LGTX1050 | 13WQ92AP010 13AS92AP010 13WS92AP010 | 2012 | 50-inch deck | 917-04174A | 917-04174 | 917-04174 PTO Clutch | Confirmed PTO clutch path for this 2012 LGT1050 / LGTX1050 model path. |
Cub Cadet LGT1050 and LGTX1050 50-Inch Deck Parts Table
Table tip: On mobile, swipe sideways to view the full deck parts table.
| Component | Quantity | OEM Part Number Path | PTO Direct Product | Fitment Note |
|---|---|---|---|---|
| Deck Belt | 1 | 754-04077 / 754-04077A / 954-04077 / 954-04077A | 954-04077A Deck Belt | Confirmed 50-inch deck belt path for this LGT1050 / LGTX1050 deck configuration. |
| Blade | 3 | 742-04053 / 742-04053A / 742-04053B / 742-04053C / 942-04053 / 942-04053A / 942-04053B / 942-04053C | 742-04053 / 942-04053C Mower Blades | Uses three matching blades on this 50-inch deck path. |
| Spindle Assembly | 3 | 618-04125 / 918-04125 / 918-04125B / 918-04125C / 618-04126 / 918-04126B | 618-04125 / 918-04125 Spindle Assembly | Uses three spindle assemblies for this 50-inch deck path. |
Model Path Note
This guide covers the 2012 LGT1050 / LGTX1050 path using the 917-04174 PTO clutch, 954-04077A belt, 942-04053C blades, and 918-04125C spindle assemblies.
Later 2013–2014 LGT1050 / LGTX1050 model paths may route to the separate 917-05122A PTO clutch path. Add a 917-05122A clutch product first before building or linking the later model-year guide.
Before Ordering
- Confirm your mower is a 2012 Cub Cadet LGT1050 or 2012 Cub Cadet LGTX1050.
- Confirm your model number is listed in the PTO clutch table above.
- Use the 917-04174 PTO clutch for the PTO clutch path.
- Use the 954-04077A deck belt for the deck belt path.
- Use the 742-04053 / 942-04053C mower blades for the blade path.
- Use the 618-04125 / 918-04125 spindle assembly for the spindle path.
Common Symptoms
- Blades will not engage when the PTO switch is pulled
- PTO clutch clicks but the deck belt does not spin
- Blades engage cold, then slow down after mowing for 10 to 30 minutes
- Deck belt slips, squeals, or jumps off the pulley path
- Rough spindle bearings, vibration, or uneven cut quality
- Burning smell near the clutch or deck belt area
FAQ
What PTO clutch fits a 2012 Cub Cadet LGT1050?
The 2012 Cub Cadet LGT1050 model number 13WQ92AP010 uses the 917-04174 PTO clutch path. The model diagram shows 917-04174A for this PTO clutch path.
What PTO clutch fits a 2012 Cub Cadet LGTX1050?
The 2012 Cub Cadet LGTX1050 model numbers 13AS92AP010 and 13WS92AP010 use the 917-04174 PTO clutch path. The model diagrams show 917-04174A for this PTO clutch path.
Is 917-04174A the same replacement path as 917-04174?
Yes. For this LGT1050 / LGTX1050 path, use the 917-04174 PTO clutch replacement listing for the 917-04174A model-diagram path.
What deck belt fits the Cub Cadet LGT1050 or LGTX1050 50-inch deck?
This 50-inch deck path uses the 954-04077A deck belt. This belt also follows the 754-04077, 754-04077A, and 954-04077 belt number path.
What blades fit the Cub Cadet LGT1050 or LGTX1050?
This 50-inch deck path uses three 742-04053 / 942-04053C mower blades.
What spindle fits the Cub Cadet LGT1050 or LGTX1050?
This 50-inch deck path uses the 618-04125 / 918-04125 spindle assembly path. The model diagrams show 918-04125B, which supersedes to 918-04125C. Three spindle assemblies are used on the deck.
Is there a full deck kit for the Cub Cadet LGT1050 or LGTX1050?
Not currently for this exact 954-04077A / 942-04053C / 918-04125C LGT1050 / LGTX1050 deck path. Use the individual clutch, belt, blade, and spindle links above.
Is this the same as the 2013 or 2014 LGT1050 / LGTX1050 clutch path?
No. This guide is for the 2012 path using the 917-04174 PTO clutch replacement. Later 2013–2014 paths may use the separate 917-05122A clutch path.
Need help confirming fitment? Email PTO Direct USA with your mower model number and deck size before ordering.