42-Inch Deck Rebuild Kit for MTD Gold, Huskee & Yard Machines | 954-04060 Belt

Overview

This 42-inch deck rebuild kit is built for select MTD Gold, Huskee, MasterCut, Yard Machines, and related MTD-built 42-inch mower decks using the listed belt, blade, spindle, and idler pulley part numbers.

The kit includes the main wear parts commonly replaced during a mower deck refresh: 2 spindle assemblies, 2 mower blades, 2 idler pulleys, and 1 deck drive belt.

This is a good option when your 42-inch mower deck has noisy spindle bearings, worn blades, slipping belts, noisy idler pulleys, uneven cut quality, deck vibration, or multiple deck parts that need to be replaced at the same time.

Important: Match your mower model, deck size, blade count, and original deck part numbers before ordering. Many MTD-built decks look similar but use different belts, blades, spindle assemblies, idler pulleys, and deck layouts.

Kit Includes

• 2 spindle assemblies
• 2 mower blades
• 2 idler pulleys
• 1 deck drive belt

Compatible Brands & Model Series

This deck rebuild kit is intended for select 42-inch MTD-built mower decks using the listed replacement part numbers.

• MTD Gold: select 42-inch deck applications listed below
• Huskee: select 42-inch deck applications listed below
• MasterCut: select 42-inch deck applications listed below
• Yard Machines: select 42-inch MTD-built mower deck applications
• Cub Cadet / Troy-Bilt / MTD references: part-number cross-reference paths listed below

Fits Select MTD-Built Models

This kit is commonly listed for select 42-inch MTD-built mower decks, including:

• Huskee: 13AD771G731 — 2007
• Huskee: 13AJ771G031, 13AJ771G231 — 2009
• MTD Gold: 13AJ795G004, 13AJ795G204 — 2008
• MTD Gold: 13AJ771G004 — 2009
• MasterCut: 13AJ775G059, 13AJ795G059 — 2008
• Yard Machines: select related 42-inch deck applications using the listed part-number path

Fitment note: Model numbers are provided as fitment clues. Always confirm your 42-inch deck and original deck part numbers before ordering.

Replaces Common Deck Belt Numbers

• Cub Cadet / MTD: 754-04060, 754-04060A, 754-04060B, 954-04060, 954-04060A, 954-04060B, 954-04060C
• Additional References: SPM201671081, GX10851

Belt Size: 1/2 inch x 96-1/2 inches

Belt note: This kit is being merchandised for the listed MTD-built 42-inch deck applications. Match your original belt number and belt size before ordering.

Replaces Common Blade Numbers

• Cub Cadet: 942-04126-X, 942-0616A, 942-0616-X
• MTD: 742-0616, 742-0616A, 742-616A, 942-0616, 942-0616A, 942-0616-X, 942-616, 942-616A
• Troy-Bilt: 742-0616, 742-0616A-0637

Blade Specs: 21-inch blade, 2-11/16 inch width, 6-point star center hole.

Replaces Common Spindle Assembly Numbers

• Cub Cadet: 918-04456A, 918-04461
• MTD: 618-04456, 918-04456, 918-04456A
• Additional References: 918-04461, 112-0460

Spindle Specs: Supplier-listed height is approximately 6-1/7 inches with approximately 6-1/6 inch pulley OD.

Spindle note: Confirm your spindle mounting pattern, pulley setup, blade mount, and deck shell condition before installation.

Replaces Common Idler Pulley Numbers

• Cub Cadet / MTD: 753-08171, 756-04129B, 756-04129C, 956-04129, 956-04129C

Idler Pulley Specs: approximately 4-6/7 inch OD.

Idler note: Confirm your original idler pulley size, mounting location, and belt routing before ordering.

Before Ordering

Before ordering this 42-inch deck rebuild kit, confirm:

• Your mower uses a 42-inch 2-blade deck
• Your mower is in the listed MTD Gold, Huskee, MasterCut, Yard Machines, or related MTD-built model family
• Your original belt number matches 954-04060, 754-04060, or another listed belt reference
• Your blade numbers match the 742-0616 / 942-0616 blade path
• Your spindle numbers match the 918-04456 / 918-04456A / 918-04461 spindle path
• Your idler pulleys match the 756-04129B / 756-04129C / 956-04129 idler pulley path
• Your blades use a 6-point star center hole
• Your deck shell, belt guides, idler arms, spindle mounting holes, and tension system are in usable condition

Do not install parts until fitment is confirmed. Installed deck parts may not be eligible for return.

Common Symptoms This Kit Helps Fix

• Noisy spindle bearings
• Deck vibration
• Uneven cut quality
• Dull, bent, cracked, or worn blades
• Deck belt slipping, squealing, or jumping off
• Noisy or loose idler pulleys
• Blade wobble or bearing play
• Multiple deck parts worn at the same time

Installation Notes

• Park the mower on a level surface and disconnect the spark plug before working on the deck
• Take photos of the belt routing before removing old parts
• Inspect the deck shell for cracks, wallowed holes, rust damage, or bent mounting areas
• Check spindle mounting bolts, blade bolts, washers, belt guides, idler arms, and tension springs
• Compare the new parts to your original parts before installation
• Confirm both idler pulleys are installed in the correct locations before routing the belt
• After installation, rotate the blades by hand with the mower off to confirm there is no contact or binding
• Test the mower at low speed first and listen for vibration, belt tracking issues, squealing, or unusual noise

Why Buy From PTO Direct USA?

• Fast USA shipping
• Fitment-first product descriptions
• Clear part-number routing for mower deck repairs
• Deck parts organized by belts, blades, spindles, pulleys, and rebuild kits
• Support for homeowners, repair shops, and mower owners

Need Help Confirming Fitment?

If you are unsure whether this kit fits your mower, send us your mower model number, deck size, blade count, and photos of your original belt, blades, spindle assemblies, idler pulleys, mower deck, and mower ID tag before ordering.

FAQ

Does this fit MTD Gold 13AJ795G004 or 13AJ795G204?

This kit is listed for select MTD Gold 13AJ795G004 and 13AJ795G204 42-inch deck applications. Confirm your original belt, blade, spindle, and idler pulley numbers before ordering.

Does this fit Huskee 13AD771G731 or 13AJ771G231?

This kit is listed for select Huskee 13AD771G731 and 13AJ771G231 applications using the listed 42-inch deck part-number path.

What belt comes in this kit?

This kit includes a deck belt replacing 954-04060 and 754-04060, along with related numbers listed above. The listed belt size is 1/2 inch x 96-1/2 inches.

What blades come in this kit?

This kit includes two blades replacing the 742-0616 / 942-0616 blade path. The blades are listed as 21 inches with a 6-point star center hole.

What spindle numbers does this kit replace?

This kit includes two spindle assemblies replacing the 918-04456 / 918-04456A / 918-04461 spindle path. Confirm your original spindle number, pulley setup, and mounting pattern before ordering.

What idler pulley numbers does this kit replace?

This kit includes two idler pulleys replacing the 756-04129B / 756-04129C / 956-04129 idler pulley path.

How many blades and spindles are included?

This kit includes 2 mower blades, 2 spindle assemblies, 2 idler pulleys, and 1 deck belt.

Can I order this kit by mower appearance?

No. Do not order by appearance alone. Match your mower model, deck size, blade count, belt number, blade number, spindle number, idler pulley numbers, and deck layout whenever possible.

Need individual deck parts instead? Browse mower deck belts, mower blades, spindle assemblies, and deck pulleys and idlers.

Need a different deck setup? Browse the full mower deck parts catalog.