759-05064 PTO Clutch Replacement for Cub Cadet Z-Force, Enforcer, Tank | Replaces 01008434, 539124833

Overview

This aftermarket 759-05064 electric PTO clutch replacement is built for select Cub Cadet, MTD, Troy-Bilt, Craftsman, Dixon, and Husqvarna mower applications using the 759-05064 / 01008434 / 539124833 clutch path.

This clutch is commonly used as a replacement for 759-05064, 75905064, 01008434, 01008434P, 539124833, 124833, and 3579 when the original clutch number and physical specifications match this listing.

Built with a 1-inch crankshaft bore, 5-3/8-inch pulley, CCW rotation from pulley side, and an integrated pigtail / connector style as shown in the product photos, this PTO clutch is designed to restore reliable mower deck blade engagement after a worn or failed clutch.

Fitment note: Model names alone are not enough to confirm compatibility. Always match your original clutch number and compare the bore size, pulley diameter, belt width, rotation, connector style, anti-rotation setup, and product photos before ordering.

Key Features

• Aftermarket electric PTO clutch replacement for the 759-05064 / 01008434 clutch family
• Crankshaft Bore: 1"
• Pulley Diameter: 5.375" / 5-3/8"
• Rotation: CCW / counter-clockwise from pulley side
• Voltage: 12V electric PTO clutch
• Belt Width: 1/2" or 5/8" belt compatibility on supported applications
• Overall Height: approximately 3-3/16"
• Connector Style: integrated pigtail / connector style as shown in product photos
• Encapsulated electromagnetic coil for consistent blade engagement
• High-temperature bearing design for mower deck operating conditions
• Fully assembled and ready to install after fitment verification

Compatible Brands & Models

This PTO clutch fits select mower platforms using the 759-05064 / 01008434 / 539124833 specification. Fitment depends on your original clutch number, deck configuration, crankshaft bore, pulley diameter, belt width, rotation, connector style, and anti-rotation setup.

Cub Cadet Applications

• Cub Cadet Z-Force: select 15, 18, 44, 48, 50, and 54 models
• Cub Cadet Z-Force Pro: select 48 and 54 models
• Cub Cadet Enforcer: select 44, 48, and 54 models
• Cub Cadet Tank M50: select 50-inch applications
• Cub Cadet HFF1748: select 48-inch wide-area walk-behind applications

MTD, Troy-Bilt & Craftsman Applications

• MTD: select applications using 01008434, 01008434P, 759-05064, or 75905064
• Troy-Bilt: select applications using 759-05064 or 75905064
• Craftsman ZTL7500: select zero-turn applications using the 759-05064 clutch path

Dixon & Husqvarna Applications

• Dixon ZTR 4515B: select applications using 124833, 3579, or 539124833
• Dixon ZTR 4516K: select applications using 124833, 3579, or 539124833
• Husqvarna: select applications using 539124833

Important: Do not order by mower brand alone. Confirm that your original clutch number matches this replacement path and that the physical clutch specifications match your original unit.

Replaces OEM Part Numbers

This replacement PTO clutch is commonly associated with the following OEM and service part numbers. Match your original clutch number and physical specs before ordering.

Cub Cadet: 01008434, 01008434P, 759-05064, 75905064

MTD: 01008434, 01008434P, 759-05064, 75905064

Troy-Bilt: 759-05064, 75905064

Craftsman: 759-05064, 75905064

Dixon: 124833, 3579, 539124833

Husqvarna: 539124833

Cross-Reference Aftermarket Numbers

• Xtreme: X0707
• Stens: 255-371X, X0707-K
• 8TEN: 810-CPT2303O

Verification note: If your old clutch shows another aftermarket number, compare the bore, pulley, belt width, rotation, connector, anti-rotation setup, and product photos before ordering. Similar-looking PTO clutches are not always interchangeable.

What’s Included

• Complete electric PTO clutch assembly
• Factory-balanced 5.375" pulley
• Pre-installed bearing assembly
• Encapsulated electromagnetic coil
• Integrated connector / pigtail style as shown in product photos

Why Buy From PTO Direct USA?

• Fast USA shipping
• OEM-spec fitment guarantee
• 1-year warranty
• Fitment-first product support
• Clear product images for easier clutch identification
• Trusted replacement supplier for homeowners, repair shops, and mower service professionals

FAQ

Does this PTO clutch replace 759-05064?

Yes. This aftermarket PTO clutch replaces 759-05064 and 75905064 on compatible Cub Cadet, MTD, Troy-Bilt, Craftsman, Dixon, and Husqvarna applications using the same clutch specification.

Does this replace Cub Cadet 01008434?

Yes. This clutch replaces Cub Cadet 01008434, 01008434P, and 759-05064 when the original clutch number and physical specifications match this listing.

Does this replace Husqvarna 539124833?

Yes. This clutch replaces Husqvarna 539124833 on compatible applications using the same 1-inch bore, 5.35 to 5.375-inch pulley, CCW rotation, belt width, connector style, and anti-rotation setup.

Does this replace Dixon 124833 or 3579?

Yes. This listing includes Dixon 124833, 3579, and 539124833 when matched to the same 759-05064 / 01008434 clutch path.

What Cub Cadet models commonly use this clutch?

This clutch is commonly associated with select Cub Cadet Z-Force, Z-Force Pro, Enforcer, Tank M50, and HFF1748 applications. Always verify your original clutch number before ordering.

What bore size does this PTO clutch use?

This clutch uses a 1-inch crankshaft bore. Confirm your crankshaft size before ordering.

What pulley diameter does this PTO clutch use?

This clutch uses a 5.375-inch pulley, commonly described as 5-3/8 inches. Some catalogs round this family to 5.35 inches, and small pulley measurement differences are common in aftermarket cross-reference data. Always confirm the original clutch number, belt width, pulley profile, and product photos before ordering.

What belt width does this clutch support?

This clutch is listed for 1/2-inch or 5/8-inch belt compatibility on supported applications. Match the belt profile used by your original mower setup before ordering.

What rotation does this clutch use?

This clutch uses counter-clockwise rotation, commonly written as CCW, when viewed from the pulley side. Match rotation before installing a replacement PTO clutch.

Is this the same as 1686880SM or Ogura GT1-BS03?

No. Keep this 759-05064 / 01008434 / 539124833 listing separate from the 1686880SM / Ogura GT1-BS03 clutch path. Both may look similar in online catalogs, but pulley specification and fitment details can differ.

Can PTO Direct USA help me confirm fitment?

Yes. Email support@ptodirectusa.com with your mower model number, serial number, deck size, original clutch number, and clear photos of the old clutch. Include photos of the pulley, bore, wiring connector, and anti-rotation bracket area.

Need a different PTO clutch? Browse the full electric PTO clutch catalog.

Removal warning: If your old clutch will not slide off the crankshaft, do not pry or hammer against the clutch body. Read the PTO clutch stuck on crankshaft guide before removal.